Agitator Pulley, Non-Clamping Design C013-0800

Genuine OEM agitator pulley, non-clamping design (part# C013-0800), the non-clamping agitator drive pulley on Simplicity and Riccar ultra-lightweight uprights. Call 763-535-0770 to order.

The Agitator Pulley, Non-Clamping Design C013-0800 is the non-clamping drive pulley that fits on the end of the steel agitator and takes the drive belt on ultra-lightweight commercial uprights. It fits Simplicity and Riccar vacuums. The non-clamping design presses onto the agitator shaft without the clamp used on later agitators, so match it to the pulley that is on your machine now.

Compatible Models

  • Simplicity: F3700, F3700.SAND, F3700C
  • Riccar: RSL5, RSL5.SAND, RSL5C

One part number fits every model listed above, whichever brand is on the machine. If your model is not shown, call us at 763-535-0770 with the model number from the label on your vacuum and we will help you find the right part.

When to Replace the Agitator Pulley, Non-Clamping Design

Replace the pulley if it is cracked, the belt slips or jumps off, the agitator turns slowly under load, or you hear clicking from the end of the agitator.

Tips and Ordering

Check the belt when you change the pulley; a stretched or glazed belt will slip on a new pulley too. Browse the Simplicity parts index. Twin City Vacuum in Crystal, Minnesota has sold and serviced vacuums since 1956, and our repair shop can fit the part for you.

Frequently Asked Questions

What does the Agitator Pulley, Non-Clamping Design (C013-0800) do?

It is the non-clamping drive pulley that fits on the end of the steel agitator and takes the drive belt on ultra-lightweight commercial uprights. The non-clamping design presses onto the agitator shaft without the clamp used on later agitators, so match it to the pulley that is on your machine now.

How do I know the Agitator Pulley, Non-Clamping Design needs replacing?

Replace the pulley if it is cracked, the belt slips or jumps off, the agitator turns slowly under load, or you hear clicking from the end of the agitator.

Which vacuums does the Agitator Pulley, Non-Clamping Design (part# C013-0800) fit?

It fits Simplicity and Riccar vacuums, including the Simplicity F3700, F3700.SAND, F3700C; the Riccar RSL5, RSL5.SAND, RSL5C. Every model is listed in the Compatible Models section on this page.

How do I order the Agitator Pulley, Non-Clamping Design (part# C013-0800) or get help?

Call us at 763-535-0770 to order the Agitator Pulley, Non-Clamping Design (part# C013-0800). Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing vacuums since 1956 and can help you find the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Agitator Pulley, Non-Clamping Design C013-0800”

Your email address will not be published. Required fields are marked *