Bag Housing 39341

The Bag Housing (part# 39341) is the main moulded body that encloses the bag compartment on the Tornado CK 14/2 Pro, model 98152, and on the Powr-Flite Borelli Dual Pro (PV160-W14-U). It is the largest single moulding on the machine and the structural core of the upper body.

Note the part number carefully. The single-motor CK 14/1 Pro uses a different housing, number 39306, because the 14/2 has to accommodate the extra switching and wiring that the second motor brings. The two machines look nearly identical from the outside, and the housings are not interchangeable — this is the part where working from the model plate rather than from appearance matters most.

Compatible Models

• Tornado CK 14/2 Pro, model 98152
• Powr-Flite Borelli Dual Pro (PV160-W14-U)

When a housing has to be replaced

Cracks around the handle mounting or the motor mounting points are the clear case, because once a mounting is broken nothing bolted to it can be held square. The subtler case is a housing that has been forced back together after an impact and no longer seals against the front cover: that lets filtered air bypass the bag seal, which shows up as dust in the compartment and a machine that seems to have lost suction with a fresh bag fitted.

Replacing the housing means stripping the upper body, so it is the moment to renew the seal kit and inspect the terminal block and switch while everything is accessible.

Price and availability

The manufacturer does not publish a price for this part number in the dealer catalogue, so it is listed here as call-for-price rather than with a guessed figure. Call 763-535-0770 and we will quote it and confirm availability before you commit to an order.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Call 763-535-0770 with your model and serial number and we will confirm the part before you order.

Frequently Asked Questions

Which machines does this housing fit?

The Tornado CK 14/2 Pro, model 98152, and the Powr-Flite Borelli Dual Pro (PV160-W14-U).

Will it fit a CK 14/1 Pro?

No. The single-motor 14/1 Pro takes housing 39306. The machines look nearly identical but the housings differ because the 14/2 carries the extra switching and wiring for its second motor. Work from the model plate, not from appearance.

Why is there no price shown?

The manufacturer does not publish a price for this part number in the dealer catalogue. We list it as call-for-price rather than estimating. Ring 763-535-0770 for a quote and lead time.