Belt Cover Assembly 39331
$20.99
Genuine Tacony belt cover assembly (part# 39331) for the Tornado CK 14/1 brush base. Fits Tornado CK 14/1 Pro (98147), CK 14/1 BSE (98145), CK 14/2 Pro (98152) and Powr-Flite Borelli Dual Pro. Ships with screw from Crystal, MN. Call 763-535-0770.
The Belt Cover Assembly (part# 39331) is a genuine Tacony OEM replacement part — the molded guard that latches over the belt and pulley compartment at the base of the machine. It is a shared part fitted across several Tornado and Powr-Flite uprights. Its job is protective: it keeps the drive belt shielded from cords, carpet and stray fingers, and its face carries the molded caution reminding the operator to close the rear belt cover before refitting the lower plate.
Compatible Models for the Belt Cover Assembly
- Tornado CK 14/1 BSE — Model 98145
- Tornado CK 14/1 Pro — Model 98147
- Tornado CK 14/2 Pro — Model 98152
- Powr-Flite Borelli Dual Pro (PV160-W14-U)
Because the cover is snapped on and off during every belt change, the small retaining tabs and latch are what usually give out — a cracked tab, a snapped latch, or a cover lost during service. Once it will not seat, the belt is exposed and can walk off the pulley, and on these bases the machine is not meant to be run with the belt compartment open. A fresh 39331, which arrives with its retaining screw, restores a cover that clicks shut and stays there.
Twin City Vacuum has been selling and servicing Tornado and Powr-Flite equipment since 1956 and stocks genuine Tacony parts, so this cover matches the original latch geometry and screw location. Browse the full Tornado CK 14/1 Pro parts and accessories, and see manufacturer listings at tornadovac.com and powr-flite.com.
Frequently Asked Questions
What does the Belt Cover Assembly (part# 39331) do?
The Belt Cover Assembly (part# 39331) is the molded guard that closes over the belt and pulley area at the base. It shields the drive belt from feet, cords and debris, keeps fingers away from the moving belt, and carries the “before installing lower plate make sure rear belt cover is closed” safety reminder molded into its face.
When should the 39331 belt cover be replaced?
Replace it if the cover is cracked, if a retaining tab or latch has broken so it no longer snaps shut, or if it is missing entirely. A cover that will not stay closed lets the belt throw off, exposes the pulley, and on many machines the base will not run correctly until the cover is seated.
Does the 39331 belt cover come with the mounting screw?
Yes — this assembly ships with its retaining screw, so you have everything needed to close the belt compartment without sourcing hardware separately.
Which models use the 39331, and how do I order it?
The 39331 Belt Cover Assembly fits the Tornado CK 14/1 Pro (98147), CK 14/1 BSE (98145), CK 14/2 Pro (98152), and the Powr-Flite Borelli Dual Pro (PV160-W14-U). Add it to your cart on this page or call 763-535-0770 — our staff at 5415 West Broadway, Crystal, MN 55428 has serviced this equipment since 1956.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
