CleanMax ZM-400 Nozzle Housing B017-4714

The CleanMax ZM-400 nozzle housing (part# B017-4714) is the genuine molded lower body of the cleaning head on the CleanMax Zoom ZM-400 commercial upright. It is the large structural shell that carries the brushroll, forms the suction inlet and airflow path up to the fan, and provides the mounting points for the base plate, wheels, and belt cover. It is specific to the ZM-400 — the ZM-200 uses B017-3714 and the ZM-600 uses D017-5014, so the housings are not interchangeable between models.

Compatible Models for the CleanMax ZM-400 Nozzle Housing

• CleanMax Zoom ZM-400

The B017-4714 nozzle housing fits the CleanMax Zoom ZM-400 only. The ZM-200 (B017-3714) and ZM-600 (D017-5014) use different housings, so confirm your model is a ZM-400 before ordering. Call us at 763-535-0770 and we will verify the correct housing for your machine.

What the B017-4714 Nozzle Housing Does

The nozzle housing is the foundation of the cleaning head. Everything that does the actual floor cleaning mounts to it: the brushroll spins inside it, the base plate and wheels bolt to it, and the suction channel molded into it carries dirt-laden air from the floor up into the fan and bag. Because it is the part that takes every bump, drop, and scrape of daily commercial use, and because it defines the fit of every other nozzle component, a cracked or broken housing is one of the few faults that justifies replacing the whole lower body rather than a single component.

Signs You Need a New Nozzle Housing

Replace the B017-4714 if the housing is cracked or has broken mounting bosses so the base plate, belt cover, or wheels no longer seat tightly, if the suction channel is split and leaking airflow, or if impact damage has warped it enough that the brushroll no longer sits square to the floor. A cracked housing leaks suction and lets the brushroll wander, so a machine that has lost cleaning performance after a hard drop often needs the housing rather than a filter or belt.

Installation and Fit

Replacing the housing is a full teardown of the cleaning head — the brushroll, base plate, wheels, belt, and motor connections all transfer to the new housing — so it is best handled by a service shop or an experienced technician. Because it is the genuine ZM-400 housing it matches every mounting point exactly. Our technicians at 5415 West Broadway, Crystal, MN 55428 have been servicing CleanMax equipment since 1956. Browse more CleanMax Zoom ZM-400 nozzle parts, or learn more at CleanMax.

Frequently Asked Questions

What does the B017-4714 nozzle housing do on the CleanMax ZM-400?

It is the molded lower body of the cleaning head that holds the brushroll, forms the suction inlet and airflow path, and provides the mounting points for the base plate, wheels, and belt cover.

How do I know if my B017-4714 needs replacing?

Replace it if the housing is cracked, has broken mounting bosses, is leaking suction from a split channel, or is warped from impact so the brushroll no longer sits square to the floor.

What models is the B017-4714 nozzle housing compatible with?

It fits the CleanMax Zoom ZM-400 only. The ZM-200 uses B017-3714 and the ZM-600 uses D017-5014. Call 763-535-0770 to confirm your model.

How do I order the B017-4714 nozzle housing or get help?

Call us at 763-535-0770 to order the CleanMax ZM-400 nozzle housing (part# B017-4714) and confirm current pricing and availability. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your machine.