Mytee ECO-PRO Motor Base Mounting Ear H554

$45.43

Motor Base Mounting Ear (part# H554) is one of the two mounting ears that tie the motor base to the frame on the Mytee ECO17-PRO and ECO14-PRO orbital floor machines.

The Mytee ECO-PRO Motor Base Mounting Ear (part# H554) is one of the two mounting ears that tie the motor base to the frame.

Compatible Models for the Mytee ECO-PRO Motor Base Mounting Ear H554

It is item 12 in the ECO17-PRO book (2 used) and item 12 in the ECO14-PRO book (2 used). Mytee does not publish a photo, so the picture is a crop of the factory drawing.

What the Motor Base Mounting Ear Does

The ears connect the motor and its mount plate to the arm of the frame through flange bushings, so the orbiting head is held in place while it is free to move.

Signs It Needs Replacing

Replace an ear if it is bent or cracked, or if its bushing hole is worn oval and the head knocks.

Specifications

  • Part number: H554
  • Use: base mounting ear
  • Quantity: 2 per machine

If you are not sure this is the part you need, send us a photo or the serial number from your machine and our service department in Crystal will confirm it before you order. Browse every numbered part on the Mytee ECO17-PRO and ECO14-PRO parts diagrams, or see Mytee’s own listing for part H554 on mytee.com.

Frequently Asked Questions

How many H554 ears does an ECO-PRO use?

Two.

What does the H554 connect?

The motor base to the frame arm.

What models is the Motor Base Mounting Ear (part# H554) compatible with?

The Mytee ECO17-PRO and ECO14-PRO orbital floor machines.

How do I order the Motor Base Mounting Ear (part# H554) or get help?

Add the Motor Base Mounting Ear (part# H554) to your cart on this page, or call us at 763-535-0770.

Questions about the Motor Base Mounting Ear (part# H554)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee ECO-PRO Motor Base Mounting Ear H554”

Your email address will not be published. Required fields are marked *