Mytee Lint Hog In-Line Filter, 2 in F200

$171.00

Lint Hog in-line vacuum filter with 2 in inlet and outlet and a basket filter (part# F200); supplied with the Mytee Escape ETM-LX-PLUS.

The Mytee Lint Hog In-Line Filter, 2 in (part# F200) is an in-line debris filter that sits in the vacuum hose between the wand and the machine. Mytee supplies one with the Escape ETM-LX-PLUS, and it fits any machine run on 2 in vacuum hose.

Compatible Models for the Mytee Lint Hog 2 in Filter F200

The Escape parts diagram lists the F200 with the machine and gives it its own drawing, sheet 5, which is on the Lint Hog page of the Escape hub.

What the Lint Hog In-Line Filter, 2 in Does

Lint, carpet fiber, sand and small debris pulled up from the carpet are caught in the Lint Hog’s mesh bag before they reach the recovery tank, the pump-out and the vacuum motors. On a truckmount with a long hose run it also lets you clear the debris at the hose rather than inside the van.

Signs It Needs Replacing

Service the Lint Hog when suction drops and the bag is full. Replace parts if the housing is cracked, the cap gasket leaks air, or the H359A bag is torn.

Specifications

  • Part number: F200
  • Inlet and outlet: 2 in
  • Filter: H359A mesh bag with stainless steel ring
  • Mount: rubber feet

Empty the bag after every job and check the cap gasket so the filter does not leak vacuum. If you are not sure which panel or part you have, send us a photo or the machine’s serial number and our service department will confirm it before you order. Browse every numbered part on the Mytee Escape ETM-LX-PLUS parts diagrams, or see Mytee’s own listing for part F200 on mytee.com.

Frequently Asked Questions

What does the Lint Hog do?

It catches lint and debris in the vacuum hose before they reach the machine.

It catches lint and debris in the vacuum hose before they reach the machine.

What bag does the F200 use?

The H359A mesh filter bag with a stainless steel ring.

The H359A mesh filter bag with a stainless steel ring.

What models is the Lint Hog In-Line Filter, 2 in (part# F200) compatible with?

Mytee supplies it with the Escape ETM-LX-PLUS, and it works in-line on any machine with 2 in vacuum hose.

Mytee supplies it with the Escape ETM-LX-PLUS, and it works in-line on any machine with 2 in vacuum hose.

How do I order the Lint Hog In-Line Filter, 2 in (part# F200) or get help?

Add the Lint Hog In-Line Filter, 2 in (part# F200) to your cart on this page, or call us at 763-535-0770.

Add the Lint Hog In-Line Filter, 2 in (part# F200) to your cart on this page, or call us at 763-535-0770. Questions about the Lint Hog In-Line Filter, 2 in (part# F200)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee Lint Hog In-Line Filter, 2 in F200”

Your email address will not be published. Required fields are marked *