Operator Deck Rubber Washer 21511080
$7.99
Genuine OEM rubber washer (part# 21511080) for the operator deck on Tornado stand-on floor scrubbers. It isolates the deck from the frame so vibration and foot shock do not pass straight into the operator or the hardware.
Genuine OEM rubber washer (part# 21511080) for the operator deck on Tornado stand-on floor scrubbers — the machines it fits are listed below. It sits between the deck and its mounting hardware on the foot board assembly and does two jobs at once: it damps vibration, and it lets the deck move a fraction under load instead of fighting the frame.
That matters more than a rubber washer sounds like it should. A stand-on machine puts an operator’s whole weight on the deck for an entire shift, and under that weight the deck is also taking brush motor vibration and every bump the castors cross. Metal-on-metal there is loud, it transmits straight into the operator’s legs and back, and it works the deck’s mounting holes oval over time.
Rubber in that position is a wear item. It takes a compression set — it stops springing back and stays squashed — and it hardens with age, oil and cleaning chemistry. A washer that has gone hard or crumbly stops isolating, and you hear it first: the deck starts to clunk or buzz where it used to be quiet, and it may feel like there is play underfoot when you shift your weight.
Replace the washers as a set rather than one at a time. If one has flattened the others are the same age and the same shift hours, and a mix of new and tired washers leaves the deck sitting unevenly. Check the mounting hardware and the holes at the same time; a washer that failed some while ago has usually let the fastener start wearing its hole.
This is the genuine Tornado part in the correct size and durometer, so the deck sits at the designed height and the isolation is what the machine was built around.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the foot board drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the rubber washer (part# 21511080) do on a Tornado stand-on scrubber?
It sits between the operator deck and its mounting hardware, damping vibration and allowing the deck a fraction of movement under the operator’s weight instead of running metal against metal.
How do I know when it needs replacing?
The deck starts to clunk or buzz where it used to be quiet, or feels like it has play underfoot. Pull one and look: a washer that has taken a compression set stays squashed, and age, oil and cleaning chemistry turn the rubber hard or crumbly.
Should I replace just the one that failed?
Replace them as a set. The others are the same age with the same shift hours, and mixing new with tired washers leaves the deck sitting unevenly. Inspect the mounting holes at the same time.
How do I order the Operator Deck Rubber Washer (part# 21511080) or get help?
You can add the Operator Deck Rubber Washer (part# 21511080) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the operator deck rubber washer (part# 21511080) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet