Powr-Flite 20 inch Pad Driver DS20

The Powr-Flite DS20 pad driver is a 20-inch driver that lets a Powr-Flite dual-speed rotary floor machine run floor pads instead of a brush. It mounts on the machine’s clutch plate and grips a standard 20-inch pad — buffing, polishing, scrubbing, or stripping pad — holding it flat and centered so the machine works the pad evenly across the deck at both low and high speed.

A pad driver is the counterpart to a scrub brush: where a brush digs into texture, the DS20 carries a flat pad for finishing work — spray buffing and polishing to bring up gloss, or a stripping pad for wet stripping smooth floors. Keeping a DS20 on hand means one dual-speed machine can move between pad-based buffing and brush-based scrubbing simply by swapping the driver, which is why it is a staple accessory for floor-care crews running the C202 and NM202.

Compatible Models for the Powr-Flite DS20 Pad Driver

The DS20 is a shared 20-inch pad driver that fits Powr-Flite dual-speed rotary floor machines:

• Powr-Flite Classic Metal Dual-Speed Floor Machine 20 inch — C202
• Powr-Flite Millennium Dual-Speed Floor Machine 20 inch — NM202

Pad Driver or Scrub Brush?

Use the DS20 pad driver with 20-inch floor pads for buffing, polishing, and pad stripping on smooth floors. For scrubbing textured or heavily soiled surfaces, run a Powr-Flite 18-inch scrub brush instead — the soft nylon SN218M, hard poly HP218M, or medium-grit MG218M. Many operators keep both a driver and a brush so one machine covers finishing and deep scrubbing.

Twin City Vacuum has been selling and servicing Powr-Flite commercial floor equipment since 1956. Questions about pads or fit? Call 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428. Manufacturer page: Powr-Flite DS20 20″ Pad Driver.

Frequently Asked Questions

What does the Powr-Flite DS20 pad driver do on a dual-speed floor machine?

The Powr-Flite DS20 is a 20-inch pad driver that mounts on a Powr-Flite dual-speed rotary floor machine in place of a brush. It grips a standard 20-inch floor pad so the machine can buff, polish, scrub, or strip using pads instead of bristles, and it centers and holds the pad flat against the floor at speed.

How do I know if my DS20 pad driver needs replacing?

Replace the Powr-Flite DS20 pad driver when the gripper face (the riser or center-lock teeth) no longer holds a pad securely, when the driver wobbles or throws pads, or when the base is cracked or worn smooth. A slipping or off-balance driver wears pads unevenly and can chatter against the floor.

Which machines is the Powr-Flite DS20 pad driver (part# DS20) compatible with?

The DS20 20-inch pad driver fits Powr-Flite 20-inch dual-speed rotary floor machines — the Classic Metal C202 and the Millennium NM202. It is sized for 20-inch pads and mounts on the machine’s standard clutch plate.

How do I order the Powr-Flite DS20 pad driver (part# DS20) or get help?

You can add the Powr-Flite DS20 pad driver (part# DS20) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right driver for your machine.