Powr-Flite Millennium Dual Speed Floor Machine 20 inch 1.5 Hp NM202
$1,289.00
Powr-Flite Millennium 20″ dual-speed floor machine (NM202) — 1.5 HP, 175/320 RPM for scrubbing, stripping, spray-buffing and dry polishing. In stock, ships from Crystal, MN. Call 763-535-0770.
The Powr-Flite NM202 is a 20″ Millennium dual-speed rotary floor machine that does the work of two machines. A single 1.5 HP motor drives the 20″ deck at 175 RPM for scrubbing and stripping, then shifts up to 320 RPM for spray-buffing and dry-polishing — so one unit both deep-cleans and brings hard floors to a high-gloss shine. The triple planetary drive delivers the torque for aggressive work, and the patented one-piece rotationally molded housing keeps noise and vibration low.
The dual speed is the NM202’s reason to exist: where the single-speed NM201HD runs only at 175 RPM for scrubbing and stripping, the NM202 adds the 320 RPM finishing speed on the very same 20″ platform. That makes it the pick for crews who want one machine to strip, scrub, spray-buff, and dry-polish tile and finished floors without owning a separate burnisher. It shares the NM201HD’s 20″ deck and pad driver, so consumables carry straight across.
Powr-Flite NM202 Specifications
- Cleaning path / pad size: 20 inches
- Motor: 1.5 HP
- Brush speeds: 175 RPM and 320 RPM (dual speed)
- Drive: triple planetary gear drive
- Housing: patented one-piece rotationally molded polyethylene body
- Weight: 110 lbs
- Warranty: 1 year parts and labor, 10 years housing
- Part number: NM202 (UPC 098612007104)
The NM202 replaces the discontinued M202-3 and is assembled and tested in Texas. For amperage, voltage, and cord length on your specific configuration, call 763-535-0770 and we will confirm from the current spec sheet.
What’s in the Box
The NM202 ships as the dual-speed floor machine with its handle and motor. Pads, a pad driver, and brushes are ordered to match your work — add the correct 20″ pad driver below, and call 763-535-0770 for pad and brush recommendations for scrubbing, stripping, or polishing.
Recommended Accessories & Consumables
The 20″-machine pad driver that fits the NM202 (the 17″ 717DP does NOT fit this 20″ deck; for brushes use the 20″ “218” series, not the 17″ “215” brushes):
The NM202’s motor runs on replaceable carbon brushes, a normal wear part. When the motor starts to spark, run rough, or lose power, replace them with the Carbon Brush for Burnishers (X8512) — the same 110 VAC brush fits this floor machine’s motor and the Powr-Flite Millennium burnishers.
Powr-Flite Floor Machine Comparison
| Model | Deck | Speed | Motor | Power Cord | Your Price |
|---|---|---|---|---|---|
| NM171HD | Millennium 17″ | 175 RPM | 1.5 HP | 50 ft | $1,089 |
| NM201HD | Millennium 20″ | 175 RPM | 1.5 HP | 50 ft | $979 |
| NM202 | Millennium 20″ dual-speed | 175 / 320 RPM | 1.5 HP | 50 ft | $1,289 |
| C131-7 | Classic Metal 13″ | 175 RPM | 1 HP | 50 ft | $1,289 |
| C171HD | Classic Metal 17″ | 175 RPM | 1.5 HP | 50 ft | $1,065 |
| C201HD | Classic Metal 20″ | 175 RPM | 1.5 HP | 50 ft | $1,099 |
| C202 | Classic Metal 20″ dual-speed | 175 / 320 RPM | 1.5 HP | 50 ft | $1,199 |
Choose the NM202 when you want one 20″ machine that both cleans and finishes, the single-speed NM201HD when you only need 175 RPM scrubbing and stripping, or the 17″ NM171HD for tighter spaces.
Shipping
Free shipping — this machine ships to your location at no added freight cost. Questions on delivery or setup? Call us at 763-535-0770.
Frequently Asked Questions
What makes the Powr-Flite NM202 different from the single-speed NM201HD?
The NM202 is the dual-speed version of the 20″ Millennium floor machine. It runs at 175 RPM for scrubbing and stripping and shifts to 320 RPM for spray-buffing and dry-polishing, so one machine handles both deep cleaning and high-gloss finishing. The single-speed NM201HD only runs at 175 RPM. Both share the same 20″ deck, 1.5 HP motor, and pad driver.
What speeds does the NM202 run at?
The Powr-Flite NM202 is a two-speed machine: 175 RPM for scrubbing, stripping, and general floor work, and 320 RPM for spray-buffing and dry polishing tile and finished floors to a high-gloss shine. The higher speed is what lets a single machine both clean and finish.
What pad driver does the NM202 use?
The NM202 is a 20″ machine, so it uses the 20″-deck pad driver — the Powr-Flite 919DP 19″ tufted pad driver (runs a 20″ pad, ships with a 1-1/4″ riser and UP2P clutch plate). It shares this driver with the NM201HD. Do not use the 17″ 717DP from the smaller NM171HD, and for brushes use the 20″-machine “218” series (e.g. SN218M), not the 17″ “215” brushes. You can add the 919DP from the accessories on this page.
How do I order the Powr-Flite NM202 (part# NM202) or get help?
You can add the Powr-Flite NM202 (part# NM202) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been selling and servicing Powr-Flite equipment since 1956 and can help you choose between the single-speed NM201HD and dual-speed NM202 and match the right pads and driver.
Popular NM202 Parts
Twin City Vacuum has been selling and servicing Powr-Flite floor machines since 1956. Browse our full Powr-Flite floor care range, see the manufacturer at powr-flite.com, or call 763-535-0770. Visit us at 5415 West Broadway, Crystal, MN 55428.
Reviews
There are no reviews yet