Powr-Flite C131-7 Classic Metal 13 inch Floor Machine (1 HP, 175 RPM)

The Powr-Flite C131-7 is a 13-inch Classic Metal single-disc rotary floor machine built around a 1 HP motor that spins the pad at 175 RPM. The 13-inch deck is the most maneuverable size in the Classic Metal line, made for restrooms, entryways, stairs landings, around fixtures, and other tight commercial spaces where a 17 or 20-inch machine will not fit. A cast metal housing and all-steel gearbox give it the durability of the larger machines in a compact footprint.

What Ships

The C131-7 ships as the base floor machine — motor, handle, deck, and power cord, assembled and ready to run on 120V. A pad driver (for pads) or a scrub/strip brush is selected separately to match your deck size and the job, so you can outfit the machine for scrubbing, stripping, bonnet cleaning, or polishing. Not sure which pad driver, brush, or pads you need? Call us at 763-535-0770 and we will spec it to your floor.

Specifications

Powr-Flite Rotary Floor Machine Comparison

All seven Powr-Flite single-disc rotary floor machines we stock, side by side. The 175 RPM speed is the standard for scrubbing, stripping, and bonnet cleaning; the dual-speed models add a 320 RPM range for polishing and spray-buffing. Pad driver or brush is selected to match your deck size and job.

Pads, Pad Drivers & Brushes

For the C131-7, the pad driver is the 613DP Tufted Pad Driver — it grips a 12-inch pad so you can scrub, strip, bonnet-clean, or polish. Drop the pad grade you need onto the 613DP and the machine is ready to run.

The C131-7 uses a 13-inch pad driver or scrub/strip brush, selected to match the pad or job. We stock pad drivers, brushes, and floor pads for the Classic Metal line — call 763-535-0770 and we will match the right driver and pad grade to your floor.

Shipping

Free shipping — this machine ships to your location at no added freight cost. Questions on delivery or setup? Call us at 763-535-0770.

Twin City Vacuum — Powr-Flite Commercial Dealer Since 1956

Twin City Vacuum has sold and serviced commercial floor equipment from our shop at 5415 West Broadway, Crystal, MN 55428 since 1956. We stock the Powr-Flite Classic Metal and Millennium floor machine lines, the pad drivers and brushes that fit them, and we service what we sell. Call 763-535-0770 to confirm the right machine, pad driver, and pad grades for your floors.

See the full Powr-Flite floor machine line and manufacturer specifications on the Powr-Flite floor machines page.

Recommended Accessories & Consumables

The Powr-Flite C131-7 Classic Metal 13″ Floor Machine drives rotary pads and brushes. Match the pad driver and pads to your job:

Powr-Flite C131-7 Tufted Pad Driver 613DP — $160.99

Frequently Asked Questions

What is the Powr-Flite C131-7 used for?

The C131-7 is a 13″ single-disc rotary floor machine that runs the pad at 175 RPM. It handles commercial floor scrubbing, finish stripping, bonnet carpet cleaning, and buffing on hard floors, using a pad driver or brush selected for the job.

Does the C131-7 come with a pad driver or brush?

No. The C131-7 ships as the base machine, ready to run on 120V. The pad driver (for floor pads) or scrub/strip brush is ordered separately to match your deck size and job. Call 763-535-0770 and we will spec the right driver, brush, and pad grades for your floor.

What size pads does the C131-7 use?

The C131-7 has a 13″ deck, so it drives pads sized for that deck when fitted with the matching pad driver. We stock the correct pad driver and pad grades for scrubbing, stripping, buffing, and polishing — call 763-535-0770 to match them to your floor.

How is the Powr-Flite C131-7 shipped, and how do I order?

The C131-7 ships free to your location by freight with no added delivery cost, assembled and ready to run. You can order it directly on this page or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has sold and serviced Powr-Flite equipment since 1956 and can confirm the right machine and accessories for your floors.