Safety Pedal Support 21513040

$77.99

Genuine OEM safety pedal support (part# 21513040) for Tornado stand-on floor scrubbers. It is the bracket that carries the safety pedal and holds it in the right relationship to the microswitch.

Genuine OEM safety pedal support (part# 21513040) for Tornado stand-on floor scrubbers — the machines it fits are listed below. It is the bracket on the foot board assembly that carries the safety pedal’s pivot and positions the pedal relative to the microswitch it operates.

Its job is geometry. The pedal has to travel a specific distance to press the switch and release it again, and that distance is set by where this bracket holds the pivot. Bend the bracket and the whole relationship shifts: the pedal can run out of travel before the switch closes, so the machine refuses to run with an operator aboard, or it can hold the switch closed at rest, so the machine stays live after the operator steps off. Both are faults people chase at the switch for an hour before anyone looks at the bracket.

It is also structural. It takes the operator’s weight through the pedal, every step-on, all shift. Damage usually comes from impact rather than fatigue — something dropped on the deck, or a machine that has been pushed into a dock plate hard enough to deform the platform — and it shows as a pedal that sits visibly crooked or no longer returns level.

Inspect it any time presence detection misbehaves or the pedal feels wrong underfoot. Check the pivot bore for wear and ovality, check the bracket for cracks around its own mounting points, and sight along it for a bend. Do not straighten a bent support and put it back: once the metal has yielded, the pivot bore has usually moved and the geometry will not come back true.

This is the genuine Tornado support, so the pedal travel and the switch operating point match as designed.

Compatible Models

This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the foot board drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the safety pedal support (part# 21513040) do?

It carries the safety pedal’s pivot and sets the pedal’s position relative to the microswitch, which is what determines how far the pedal has to travel to make and break the switch.

Can a bent support cause a presence-detection fault?

Yes, and it is a common one to miss. A bent bracket shifts the pedal geometry, so either the pedal runs out of travel before the switch closes (machine will not run with an operator on it) or the switch stays closed at rest (machine stays live after the operator steps off).

Can I straighten a bent pedal support?

Don’t. Once the metal has yielded the pivot bore has usually moved with it, and the geometry will not come back true. Replace it, and check the pivot bore for wear and the bracket for cracks around its mounting points.

How do I order the Safety Pedal Support (part# 21513040) or get help?

You can add the Safety Pedal Support (part# 21513040) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the safety pedal support (part# 21513040) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Safety Pedal Support 21513040”

Your email address will not be published. Required fields are marked *