Screw M6 x 12 60110604
$1.99
Genuine OEM M6 x 12 mm screw (part# 60110604) for Tornado floor scrubbers. It is the short M6 used where a bracket or cover bolts flat in the battery area.
Genuine OEM M6 x 12 mm screw (part# 60110604) for Tornado floor scrubbers — compatible machines are listed below. On the battery charger assembly it fastens a bracket or cover flat against its mounting, with nothing stacked behind it.
M6 is the size used where a joint needs genuine clamping force without carrying machine weight, and 12 mm is the short length for a plain two-part joint. The machine uses several M6 lengths and they look identical in a tray, so check the number: too short and there is not enough thread engaged for a joint that vibrates all day; this one in a deeper joint leaves the clamp marginal, and in a shallow blind hole a longer substitute bottoms out so the wrench reads tight while the part is still loose.
The battery compartment is a particular environment. In a vented lead-acid installation, charging gives off acid mist, and that attacks fasteners steadily — a screw here will usually look worse at the same age than one elsewhere on the machine. A corroded fastener in a battery compartment is also a nuisance at exactly the wrong moment, since this is the area someone needs to open when a machine will not hold charge.
Inspect it whenever the compartment is open: replace a screw whose hex or drive recess is rounded, whose thread is corroded or galled, or whose shank is bent. Renew any lock washer with it, and check the tapped hole — a joint that will not stay tight is often a tired hole rather than a tired screw.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 23 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the battery charger drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the screw (part# 60110604) used?
On the battery charger assembly, fastening a bracket or cover flat against its mounting with nothing stacked behind it. It is the short M6; the machine uses several M6 lengths.
Why do fasteners here corrode faster?
Because in a vented lead-acid installation, charging gives off acid mist, which attacks fasteners steadily. A screw in the battery area will usually look worse at the same age than one elsewhere on the machine.
How do I know when to replace it?
When the hex or drive recess is rounded, the thread is corroded or galled, or the shank is bent. Renew the lock washer with it, and check the tapped hole — a joint that will not stay tight is often a tired hole rather than a tired screw.
How do I order the Screw M6 x 12 (part# 60110604) or get help?
You can add the Screw M6 x 12 (part# 60110604) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the screw m6 x 12 (part# 60110604) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet