Tornado BDSO 27/28 Battery Charger Parts

Find genuine Tornado BDSO 27/28 replacement parts for Models 99786 and 99786C. Can’t find your part? Call us at 763-535-0770.

Find the item number on the drawing, then match it to the same number in the table below that drawing. Each table lists the part description and Tornado’s part number for every numbered item on that sheet.

Battery Charger — Earlier Serial Numbers

Tornado prints no serial range on this drawing — it applies to machines built before the revision shown below. If your machine is close to that break, call 763-535-0770 with your serial number and we will confirm which drawing you need.

The battery charger assembly is what bolts Tornado’s onboard charger to the BDSO 27/28 and holds it there through years of vibration. Most of what you see on this drawing is the mounting hardware and the charger support bracket, plus the blocking lever that keeps the charger seated. When a charger stops working the charger itself is usually the part you need, but a cracked support bracket or a sheared mounting screw will let the unit move and chafe its leads, which produces an intermittent charge fault that looks electrical and is actually mechanical. Check the bracket and the lever before you replace the charger.

#ImagePart DescriptionPart NumberPrice
1Screw M6 x 10 INOX60110602Call 763-535-0770
2Tornado BDSO 27/28 Washer schematic diagram part number 60306003Washer60306003$1.99
3Tornado BDSO 27/28 Lock Washer schematic diagram part number 7CL002Lock Washer7CL002$2.99
4Charger Support21501030Call 763-535-0770
5Screw M5 x 1660100501Call 763-535-0770
6Tornado BDSO 27/28 Washer schematic diagram part number 60305001Washer60305001$1.99
7Tornado BDSO 27/28 Lock Nut schematic diagram part number 60220502Lock Nut60220502$1.99
8Tornado BDSO 27/28 Screw M6 x 12 schematic diagram part number 60110604Screw M6 x 1260110604$1.99
9Tornado BDSO 27/28 Blocking Lever schematic diagram part number 61820002Blocking Lever61820002$8.99
10Tornado BDSO 27/28 Battery Charger schematic diagram part number 64602038Battery Charger64602038$1478.99

Battery Charger — From S/N 20000981

This drawing covers machines from serial number 20000981 forward.

#ImagePart DescriptionPart NumberPrice
1Screw M6 x 10 INOX60110602Call 763-535-0770
2Tornado BDSO 27/28 Lock Washer schematic diagram part number 7CL002Lock Washer7CL002$2.99
3Tornado BDSO 27/28 Washer schematic diagram part number 60306003Washer60306003$1.99
4Charger Support21501030Call 763-535-0770
5Screw M5 x 1660100501Call 763-535-0770
6Tornado BDSO 27/28 Washer schematic diagram part number 60305001Washer60305001$1.99
7Tornado BDSO 27/28 Lock Nut schematic diagram part number 60220502Lock Nut60220502$1.99
8Tornado BDSO 27/28 Screw M6 x 12 schematic diagram part number 60110604Screw M6 x 1260110604$1.99
9Tornado BDSO 27/28 Blocking Lever schematic diagram part number 61820002Blocking Lever61820002$8.99
10Tornado BDSO 27/28 Battery Charger schematic diagram part number 64602038Battery Charger64602038$1478.99
11Cover21501100Call 763-535-0770

Frequently Asked Questions About the Tornado BDSO 27/28 Battery Charger

How do I know whether my BDSO 27/28 needs a new charger or just new mounting hardware?

Charge the machine with the cover off and watch the charger. If it charges normally but moves or rattles, you need the support bracket, blocking lever or hardware. If it does not come on, or faults partway through a cycle with sound wiring, the charger itself is the failed part.

Is the charger on this drawing the same for both serial ranges?

Tornado publishes two versions of this drawing, one for earlier machines and one from S/N 20000981 forward. The hardware callouts differ between them. Match your serial number to the range stated above each drawing before ordering.

Can I use a different charger on my BDSO 27/28?

Call 763-535-0770 before you do. The onboard charger has to match the battery chemistry in your machine; lead acid, AGM and TPPL batteries do not all take the same charge profile, and the wrong one shortens battery life.

Not sure which battery charger part your machine takes? Call 763-535-0770 with the serial number from the data plate, or stop in at 5415 West Broadway, Crystal, MN 55428 — we have sold and serviced commercial floor equipment since 1956. You can also go back to all Tornado BDSO 27/28 parts diagrams or browse the Tornado BDSO 27/28 parts category.