Spacer X9027
$3.99
Genuine Tacony OEM spacer (part# X9027) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S brush assembly. Sets a position in the lift and brush geometry, so its length is the specification.
The Spacer (part# X9027) is a genuine Tacony OEM replacement part from the brush assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the spacer that sets the axial position of a component in the brush and lift assembly.
What the Spacer does
Spacers in a lift mechanism decide where a pivot sits along its pin, and that in turn decides whether the linkage moves in a plane or works itself sideways with every cycle. A spacer that has been crushed or swapped for a different length puts a small permanent angle into the mechanism, which shows up as pedal stiffness, uneven wear at the pivots, and a brush that lands at a slightly different height on each side.
When to replace the Spacer (X9027)
Replace it when it is crushed, cracked, or measurably shorter than the matching spacer on the other side of the mechanism, and when the assembly has developed play that does not come from the pivot itself. Scoring on the outside of a spacer means something has been running against it that should not have been.
Spacer X9027 — fitment and installation notes
Refit each spacer to the position it came from, since similar lengths are common in a mechanism like this. Do not build up a length from washers, and cycle the lift fully and check the brush height on both sides after reassembly rather than assuming it went back correctly. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Spacer
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Spacer do on the Tornado Marathon SE 900?
Spacers in a lift mechanism decide where a pivot sits along its pin, and that in turn decides whether the linkage moves in a plane or works itself sideways with every cycle. A spacer that has been crushed or swapped for a different length puts a small permanent angle into the mechanism, which shows up as pedal stiffness, uneven wear at the pivots, and a brush that lands at a slightly different height on each side.
How do I know if my Spacer needs replacing?
Replace it when it is crushed, cracked, or measurably shorter than the matching spacer on the other side of the mechanism, and when the assembly has developed play that does not come from the pivot itself. Scoring on the outside of a spacer means something has been running against it that should not have been.
What models is the Spacer (part# X9027) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Spacer (part# X9027) or get help?
You can add the Spacer (part# X9027) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
