Tornado Brute Force 2000 98486 Screw 1/4-20 x 1/2 in. 7BS003

$2.99

Genuine OEM 1/4-20 x 1/2 in. screw (part# 7BS003) for the Tornado Brute Force 2000 High-Speed Glazer with Dust Control, Model 98486 — shown on the current main body drawing.

SKU: 7BS003 Category: Brand:

The 7BS003 is a 1/4-20 coarse-thread screw, 1/2 inch long, used on the dust-control side of the Brute Force 2000 Dust Control glazer (Model 98486). It appears on the current 14 July 2025 main body drawing and on the earlier 29 December 2022 main assembly. It does not appear on the 98458B or 98482B drawings at all — it is specific to the dust-control machine, which is why this listing names the model. It is a shared part used across Tornado machines — see the full list of models below.

Short 1/4-20 screws on the 98486 live in the dust-control group with the filter mount, shroud and skirt hardware. That is an area that gets taken apart regularly: the filter has to come out for cleaning or replacement, and anything that is removed on a schedule is hardware that eventually gets cross-threaded, over-torqued or lost on a shop floor. Keeping a few spares on the shelf is cheaper than finding one missing halfway through a service.

Replace the 7BS003 if the threads are damaged, the head is rounded from a slipping driver, or it no longer holds. Watch out for over-torquing: a 1/2 inch long screw has limited thread engagement, so pulling it down hard strips the threads it is going into rather than the screw itself. If the hole has already stripped, that is a repair to the part it threads into, not a bigger screw — call us before you improvise, because a dust-control panel that is not held square lets dust escape and defeats the whole point of the machine.

If dust is escaping from your 98486, check the filter, the skirt and the shroud fit before you replace drive parts — a shroud held by a missing or loose fastener sits off the floor and leaks. Call 763-535-0770 with your model and serial number if you want help identifying which fastener belongs at which callout.

Compatible Models

  • Tornado models:
    • Taskforce 1700 Wet/Dry with Trot-Mop (17-Gallon) – Series A — 94224
    • Vapor Mister and Specialty Cleaner — 97150
    • 17″ — 97562B
    • 20″ — 97564B
    • Mini-Marathon 425 Carpet — 98150
    • Mini Marathon Lundmark — 98150LM
    • MARATHON BOX — 98250
    • Marathon Box — 98252H
    • Apartment Pro — 98260
    • Room-Mate — 98262
    • PFX 10-T Midsize — 98320
    • Brute Force 2000 High-Speed Glazer with Dust Control — 98486
    • 20″ Clean-Air Battery Glazer 2500B Series H — 98498
    • Clean Air Battery Glazer 2500B — 98498Z
    • 20″ Clean-Air Battery Glazer 2500B – Series A — 98499
    • Pro Spotter — 98636
    • PRO 750 — 98818
    • PRO 500 — 98820
    • PRO 500 OZ — 98826
    • PRO 500 w/Heat and Prefect Heat — 98830
    • (Formerly CFR35S) Pro Spotter — 98834
    • ECO 500 AW — 98838
    • ECO 500AWH — 98842
    • ECO 500AWH Plus — 98846
    • ECO 500AW Plus — 98848
    • 20″ EZ BD Floorkeeper (w/ 2-12 V Batteries) – Series A — 99105A
    • 20″ EZ BD Floorkeeper (w/ 4-6 V Batteries) – Series A — 99105B

This part is used on many more Tornado and Powr-Flite machines than we can list here — call 763-535-0770 if yours is not shown and we will confirm it for you.

Frequently asked questions

Where is the 1/4-20 x 1/2 in. screw (part# 7BS003) used on the Tornado 98486?

It appears on the current 14 July 2025 main body drawing and on the earlier 29 December 2022 main assembly, in the dust-control area of the machine.

How do I know if my 7BS003 screw needs replacing?

Replace it if the threads are stripped or cross-threaded, if the head is rounded off, or if it will not hold torque. Fit new hardware when you reassemble the dust-control group rather than re-using damaged screws.

Does the 7BS003 screw fit the 98458B or 98482B burnishers?

No. It appears only on the Brute Force 2000 Dust Control (98486) drawings. The 98458B and 98482B use different hardware.

What models is the 1/4-20 x 1/2 in. screw (part# 7BS003) compatible with?

The Tornado Brute Force 2000 High-Speed Glazer with Dust Control, Model 98486, on both its current and earlier drawings.

How do I order the 1/4-20 x 1/2 in. screw (part# 7BS003) or get help?

You can add the 1/4-20 x 1/2 in. screw (part# 7BS003) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Tornado Brute Force 2000 98486 Screw 1/4-20 x 1/2 in. 7BS003”

Your email address will not be published. Required fields are marked *