Tornado BDSO 27/28 Brush Deck Actuator Motor 46320070
$627.99
Genuine Tornado brush deck actuator motor for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. Raises and lowers the scrub deck.
The brush deck actuator motor raises and lowers the scrub deck on a Tornado BDSO 27/28. It carries more load than the squeegee actuator does, because it lifts the whole deck with its brushes or pad drivers attached, and it sets the deck down under controlled pressure rather than dropping it. That combination of weight and repetition is what wears it out.
A deck that will not lift is the obvious symptom, but the more common complaint is a deck that lifts slowly, or that sags back down under its own weight after it has been raised. Both point at the actuator rather than the deck. Inside, a worn drive nut lets the screw back-drive under load, and a motor with worn brushes simply runs out of torque at the top of the lift.
Check the mechanical side before ordering. The brush base control linkage, its pins and bushings share this drawing, and worn pivots will make a sound actuator feel weak and leave the deck sitting out of level — which shows up separately as uneven brush wear across the scrub path. If nothing runs when you press the lift control, the problem is electrical and belongs on the control panel and wiring pages instead.
Tornado revised the brush base control assembly during production, so check the serial number on your data plate against the ranges shown on the brush base control page before ordering any part from that section. Call 763-535-0770 if you want us to check it.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — Model 99786
- Tornado BDSO 27/28 Stand-On Scrubber — Model 99786C
See where this part sits on the machine on the brush base control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the brush deck actuator motor do on the Tornado BDSO 27/28?
It raises and lowers the scrub deck, lifting the deck with its brushes or pad drivers attached and setting it back down under controlled pressure.
My deck lifts but sags back down. Is that the actuator?
Usually yes — a worn drive nut inside the actuator lets the screw back-drive under the weight of the deck. Check the control linkage pivots at the same time, since worn pivots produce a similar complaint.
What models is the brush deck actuator motor (part# 46320070) compatible with?
Tornado lists it for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. Call us before ordering if your machine is a different Tornado model.
How do I order the brush deck actuator motor (part# 46320070) or get help?
You can add the brush deck actuator motor (part# 46320070) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the brush deck actuator motor (part# 46320070) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet