Tornado Strike Housing for Brush Motor K56054333

The Housing for the Brush Motor (part# K56054333) is the enclosure the Strike’s agitation motor bolts into, inside the brush head. It fixes the motor’s position relative to the brushroll, and that position is what keeps the drive belt running straight.

Compatible Models for the Housing for Brush Motor

• Tornado Strike Cordless Upright Vacuum — Model TV190-W10-U

This is a Strike-only component: Tacony’s parts records list the Tornado Strike TV190-W10-U as the single machine that takes part# K56054333, so there is no cross-model substitution to worry about when you order it.

What the Housing for Brush Motor does

Belt alignment is the whole point of this moulding. The pulley on the motor and the drive band on the roll have to sit in the same plane; if the housing lets the motor sit even slightly skewed, the belt rides to one edge of the pulley, wears on its side rather than its face, and fails early and repeatedly. The housing also keeps carpet fibre and grit out of the motor and contains the noise the motor makes, which is why a machine with a cracked housing sounds harsher than it used to.

Signs the Housing for Brush Motor needs replacing

Suspect it when belts keep failing in the same way — worn on one edge, or thrown off the pulley entirely — and a new belt and a known-good roll have not cured it. Visible cracks around the mounting points, a motor that can be rocked by hand once its fixings are tight, or a housing that no longer pulls up flush to the lower housing all mean replacement. A rattle or vibration from the brush head that changes when the head is pressed is another sign.

Fitting the Housing for Brush Motor

Reached with the brush head open: take the top cover off, release the belt, then unbolt the motor from the housing and the housing from the lower housing. Move the motor into the replacement before anything else, tighten evenly so the motor is not pulled out of square, and refit the assembly. With the belt back on, turn the roll by hand and watch the belt track — it should sit centrally on the pulley without creeping to one side.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. You can browse the rest of the machine on our Tornado Strike parts pages, and the manufacturer publishes specifications at tornadovac.com.

Frequently Asked Questions

What does the brush motor Housing do on the Tornado Strike?

It holds the brush motor in a fixed position inside the brush head so the motor pulley stays aligned with the brushroll, keeps grit and carpet fibre out of the motor, and contains motor noise.

How do I know if my brush motor Housing needs replacing?

Repeated belt failures that a new belt and a good roll do not cure — especially belts worn on one edge or thrown off the pulley — along with cracks around the mounting points, a motor that rocks with its fixings tight, or a new rattle from the head.

What models is the Housing for Brush Motor (part# K56054333) compatible with?

The Tornado Strike TV190-W10-U cordless upright vacuum, and only that machine. Tacony’s parts records list no other model that takes part# K56054333.

How do I order the Housing for Brush Motor (part# K56054333) or get help?

You can add the Housing for Brush Motor (part# K56054333) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.