Tornado Strike Sealing Strip K53650770

The Sealing Strip (part# K53650770) runs along the Tornado Strike’s glide sole and closes the gap between the sole and the floor. Suction is only worth what reaches the carpet, and a strip that has hardened or torn is the most common reason a machine that sounds perfectly healthy stops picking up.

Compatible Models for the Sealing Strip

• Tornado Strike Cordless Upright Vacuum — Model TV190-W10-U

This is a Strike-only component: Tacony’s parts records list the Tornado Strike TV190-W10-U as the single machine that takes part# K53650770, so there is no cross-model substitution to worry about when you order it.

What the Sealing Strip does

Airflow follows the path of least resistance. If there is a gap along the edge of the sole, air comes in through that gap instead of through the pile, and the machine works hard while lifting very little. The strip keeps that path closed as the head rides across the floor, flexing over seams and thresholds and returning to shape. It also cushions the sole edge against hard floors, which keeps it from scoring polished surfaces.

Signs the Sealing Strip needs replacing

Replace it when it is torn, split or missing sections; when it has gone hard and no longer flexes against the floor; when it is worn back far enough that a gap is visible with the head sitting flat; or when it has come away from its channel. Loss of pick-up on carpet that survives a new bag, a clean HEPA cartridge, a clear hose and a good brushroll usually ends here.

Fitting the Sealing Strip

Turn the head over and clear the channel completely — old adhesive, compacted fibre and grit all stop a new strip seating, and a strip that is not fully home will lift again within weeks. Work the replacement in from one end, pressing it fully into the channel along its whole length, and check with the head sitting flat on a bench that the strip touches the surface evenly from end to end.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. You can browse the rest of the machine on our Tornado Strike parts pages, and the manufacturer publishes specifications at tornadovac.com.

Frequently Asked Questions

What does the Sealing Strip do on the Tornado Strike?

It closes the gap between the glide sole and the floor so airflow is pulled through the carpet pile rather than leaking in at the edge of the head, and it cushions the sole edge against hard floors.

How do I know if my Sealing Strip needs replacing?

It is torn, split or missing sections, has gone hard and no longer flexes to the floor, has worn back far enough to leave a visible gap, or has come out of its channel. Poor pick-up that survives a new bag, clean filter, clear hose and good brushroll usually ends here.

What models is the Sealing Strip (part# K53650770) compatible with?

The Tornado Strike TV190-W10-U cordless upright vacuum, and only that machine. Tacony’s parts records list no other model that takes part# K53650770.

How do I order the Sealing Strip (part# K53650770) or get help?

The Sealing Strip (part# K53650770) is a call-for-price item, so ring us on 763-535-0770 and we will quote it and check stock while you are on the line. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can confirm it is the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.