Tornado Strike Wand Clip K50410080

The Wand Clip (part# K50410080) is the moulded clip that holds the Tornado Strike’s wand against the body when it is stowed. Small, cheap, and the reason a wand is still with the machine at the end of a shift rather than left in a corridor.

Compatible Models for the Wand Clip

• Tornado Strike Cordless Upright Vacuum — Model TV190-W10-U

This is a Strike-only component: Tacony’s parts records list the Tornado Strike TV190-W10-U as the single machine that takes part# K50410080, so there is no cross-model substitution to worry about when you order it.

What the Wand Clip does

A stowed wand has to survive being carried, loaded into a van and pushed through doorways, and it has to release with one hand when the operator wants it. That is a narrow tolerance: too tight and people stop using the tools, too loose and the wand falls out. The clip’s grip is what sets it, and that grip depends on the plastic keeping its spring — which it loses slowly with use and quickly if the wand is levered out sideways.

Signs the Wand Clip needs replacing

Replace it when the wand no longer stays put, when the clip is cracked or has lost an arm, when it has gone slack so the wand rattles in place, or when it has gone so brittle that inserting the wand makes it creak. A wand that gets left off the machine because it is awkward to clip in is usually a clip past its best rather than a careless operator.

Fitting the Wand Clip

Release the old clip from the body, clear any debris from its seat, and fit the replacement squarely — a clip mounted slightly twisted grips on one arm only and fails again quickly. Test with the wand: it should go in with light pressure, stay put when the machine is lifted, and come out with one hand.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. You can browse the rest of the machine on our Tornado Strike parts pages, and the manufacturer publishes specifications at tornadovac.com.

Frequently Asked Questions

What does the Wand Clip do on the Tornado Strike?

It holds the wand against the machine body when stowed — tight enough that the wand stays put while the machine is carried, loose enough to release with one hand.

How do I know if my Wand Clip needs replacing?

The wand no longer stays put or rattles in place, the clip is cracked or has lost an arm, or it has gone brittle and creaks when the wand is inserted.

What models is the Wand Clip (part# K50410080) compatible with?

The Tornado Strike TV190-W10-U cordless upright vacuum, and only that machine. Tacony’s parts records list no other model that takes part# K50410080.

How do I order the Wand Clip (part# K50410080) or get help?

You can add the Wand Clip (part# K50410080) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.