Tornado Strike Wheel and Axle Sets K47755890

The Wheel and Axle Sets (part# K47755890) are the small rollers that carry the back of the Tornado Strike’s brush head. Tacony supplies two sets in the pack, which matches how they wear — in pairs, and usually at the same time.

Compatible Models for the Wheel and Axle Sets

• Tornado Strike Cordless Upright Vacuum — Model TV190-W10-U

This is a Strike-only component: Tacony’s parts records list the Tornado Strike TV190-W10-U as the single machine that takes part# K47755890, so there is no cross-model substitution to worry about when you order it.

What the Wheel and Axle Sets does

These wheels set the ride height at the rear of the head and take the rolling load so the glide sole does not have to drag across the floor. Smooth-running wheels are most of what makes a machine feel light to push; a seized one turns into a skid that scores hard floors and drags on carpet. Because they are on axles rather than moulded in, they can be renewed without touching the sole itself.

Signs the Wheel and Axle Sets needs replacing

Replace them when a wheel no longer spins freely by hand, when one is flat-spotted from being dragged, when the axle has worn oval so the wheel wobbles, or when a wheel is cracked or missing. A machine that has started to feel heavy on hard floors, or that leaves faint parallel marks, usually has at least one wheel that has stopped turning.

Fitting the Wheel and Axle Sets

Turn the head over and work on a bench rather than the floor — the axles are small and easy to lose. Clear packed hair from the wheel pockets, which is the usual reason one has seized in the first place, then fit the new wheels on their axles and check each spins freely before the head goes back. Since the pack contains two sets, change them as a pair so the head sits level.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. You can browse the rest of the machine on our Tornado Strike parts pages, and the manufacturer publishes specifications at tornadovac.com.

Frequently Asked Questions

What do the Wheel and Axle Sets do on the Tornado Strike?

They carry the rear of the brush head on the floor, setting its ride height and taking the rolling load so the glide sole is not dragged along the surface.

How do I know if my Wheel and Axle Sets need replacing?

A wheel that will not spin freely by hand, a flat spot from being dragged, an axle worn oval so the wheel wobbles, or a cracked or missing wheel. A machine that suddenly feels heavy on hard floors usually has a seized wheel.

What models is the Wheel and Axle Sets (part# K47755890) compatible with?

The Tornado Strike TV190-W10-U cordless upright vacuum, and only that machine. Tacony’s parts records list no other model that takes part# K47755890.

How do I order the Wheel and Axle Sets (part# K47755890) or get help?

You can add the Wheel and Axle Sets (part# K47755890) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.