Vibration Damper 48106020

$21.99

Genuine OEM vibration damper (part# 48106020) for Tornado floor scrubbers. It isolates the vacuum motor from the machine frame, cutting noise and keeping motor vibration out of the tank, the fasteners and the operator platform.

Genuine OEM vibration damper (part# 48106020) for Tornado floor scrubbers — the machine list is below. It mounts between the vacuum motor assembly and the structure that carries it, and its job is to stop the motor shaking the rest of the machine.

A vacuum motor spins fast and is never perfectly balanced. Bolted solidly to a frame, it would transmit that vibration into the tank, the panels, every fastener in the area and the platform the operator stands on. The damper breaks that path. The result is a quieter machine, a less fatiguing one to operate for a full shift, and — more importantly for cost — fasteners around the motor that stay tight and a tank that does not crack around its mounting points.

Dampers fail by hardening and by splitting. Rubber takes a permanent set under constant load and heat, and once it has gone hard it is a solid spacer rather than an isolator. Signs: the machine has become noticeably louder or buzzier at the back, you can feel vibration through the platform that was not there before, fasteners near the motor keep working loose, or the damper looks compressed, cracked, crazed or split when inspected. A damper that has collapsed also drops the motor out of alignment with its gasket, which quietly costs suction as well.

Replace it whenever the vacuum motor is out, and whenever a noise complaint cannot be traced to the motor itself. Check the gasket and the motor separator at the same time — these three parts share a service interval because they all sit in the same hot, wet, vibrating place.

This is the genuine Tornado part, matched to the original rubber compound and dimensions, so the motor sits at the right height and is isolated the way the machine was designed.

Compatible Models

  • Tornado BD 26/26 — 99726
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado 99729 — TS550-W28-U

This part is shared across 14 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the vacuum drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the vibration damper (part# 48106020) do on a Tornado floor scrubber?

It isolates the vacuum motor from the structure carrying it, so motor vibration does not travel into the tank, the panels, the fasteners and the operator platform.

How do I know if the vibration damper (part# 48106020) needs replacing?

Signs are a machine that has become louder or buzzier at the back, vibration felt through the platform that was not there before, fasteners near the motor repeatedly working loose, or a damper that looks compressed, hardened, crazed or split.

Can a failed damper cost me suction too?

Yes. A collapsed damper lets the motor sit lower than designed, which puts the motor gasket out of its correct compression and allows air to leak in around the motor instead of being pulled through the squeegee.

How do I order the Vibration Damper (part# 48106020) or get help?

You can add the Vibration Damper (part# 48106020) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the vibration damper (part# 48106020) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Vibration Damper 48106020”

Your email address will not be published. Required fields are marked *