Washer 03321
$2.99
Genuine Tacony .391 in ID x 1.25 in flat washer, zinc-plated steel. Fits Series E, F, G and J. In stock in Crystal, MN. Call 763-535-0770. Fits Tornado 93030, Tornado 93031, CleanMax CM-WAV and Powr-Flite PF2030.
The Washer (part# 03321) is a genuine Tacony OEM flat washer in zinc-plated steel,.391 in inside diameter by 1.25 in outside diameter and.125 in thick, used on the Tornado CK 3030 wide-area vacuum (Model 93030). F, G and J. It is a genuine Tacony OEM part shared across CleanMax, Powr-Flite and Tornado machines — see the full compatibility list below. It also fits the Tornado 98168 20″ Marathon 1200 carpet extractor (12 Gallon 115V), all series (B, C, D, E, F and P).
This is the heavy washer of the set. At an eighth of an inch thick and an inch and a quarter across it is closer to a spacer or a thrust face than to the thin stampings used elsewhere on the machine, and it is fitted where a pivot or a load-bearing joint needs a hard, flat surface to turn or bear against. The thickness is what lets it carry that load without dishing, and it is why this washer must not be substituted with a standard thin flat washer of the same bore.
Check it for polishing or grooving on the bearing face, for any cupping across its diameter, and for wear at the bore. A washer used as a thrust face wears in service rather than simply corroding, and a grooved one no longer runs true. Replace it whenever the joint it sits in is stripped for other work — it is far cheaper than the pivot it protects.
Compatible Models for the Washer 03321
- Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series E, F, G and J
- Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V
- CleanMax CM-WAV Wide Area Vacuum
- Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum
- Tornado 98168 20″ Marathon 1200 Carpet Extractor (12 Gallon 115V) — all series (B, C, D, E, F and P)
These machines are built on the same wide-area platform under different brands and share the great majority of their parts.
Many Tacony fasteners are shared more widely across the Tornado, CleanMax, Riccar, Simplicity and Powr-Flite ranges; if your machine is not listed, call 763-535-0770 and we will confirm before you order.
Twin City Vacuum has been selling and servicing Tacony equipment since 1956 and stocks the genuine 03321 part rather than a hardware-store substitute. Browse the full Tornado 93030 main assembly parts, or read more on the Tornado manufacturer site.
Frequently Asked Questions
What does the Washer (part# 03321) do on the Tornado 93030?
It is the thick.391 in ID flat washer, used at load-bearing and pivot joints on Series E, F, G and J. Its thickness lets it act as a hard bearing or thrust face rather than just spreading clamp load.
Can I use a thinner washer of the same bore instead?
No. The.125 in thickness is part of the specification — it sets the standoff at the joint and gives the washer enough section to carry load without dishing. A thin washer of the same bore will deform and let the joint go slack.
How do I know if my Washer (part# 03321) needs replacing?
Look for a polished, grooved or scored bearing face, cupping across the washer, wear or ovalling at the bore, and any reduction in thickness compared with a new one. Any of those means it is no longer holding the joint at the right standoff.
How do I order the Washer (part# 03321) or get help?
You can add the Washer (part# 03321) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
