Wing Nut M6 INOX 61706004

$3.99

Genuine OEM M6 stainless wing nut (part# 61706004) for Tornado floor scrubbers. It lets a squeegee fastening be undone by hand.

Genuine OEM M6 stainless (INOX) wing nut (part# 61706004) for Tornado floor scrubbers — the machines it fits are listed below. On the squeegee it secures a fastening that is meant to be undone by hand.

Wing nuts are specified where a part has to come off often: squeegee blades get changed and rotated on a schedule, and if that needs a wrench it happens later than it should. The wings are the whole point, so a wing nut with a broken or bent wing has failed even if the thread is perfect — it is now a nut that needs pliers, and pliers on a wing nut is how the thread gets ruined too.

Stainless matters here as much as anywhere on the machine. The squeegee sits in recovery water all day and is hosed at the end of a shift, and a plated wing nut in that position rusts into its thread. Then someone forces it, the wings bend, and a two-minute blade change becomes a repair.

Stainless does gall against stainless when run down dry and fast, and a wing nut is easy to spin on quickly by hand. Run it down steadily and stop when it seats; the clamping force available through a pair of wings is limited by design, and if a joint needs more than that, something else is wrong.

Replace rather than persevere with a wing nut whose wings are bent, cracked or broken, whose thread drags or has galled, or that has corroded enough to be stiff. They are inexpensive, and a seized one costs more in time at the next blade change than a box of new ones.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 30″ FK3000 Floorkeeper Automatic – Series C — 99430
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 30 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Why is a wing nut used here (part# 61706004)?

Because the fastening is meant to be undone by hand. Squeegee blades get changed and rotated often, and a job that needs a wrench gets done later than it should.

My wing nut is stiff. Can I use pliers?

That is how both the wings and the thread get ruined. A wing nut that needs pliers has already failed — replace it. They are inexpensive, and a seized one costs more time at the next blade change than a box of new ones.

Why stainless?

The squeegee sits in recovery water all day and is hosed at the end of a shift. A plated wing nut rusts into its thread, then gets forced, the wings bend, and a two-minute blade change becomes a repair.

How do I order the Wing Nut M6 INOX (part# 61706004) or get help?

You can add the Wing Nut M6 INOX (part# 61706004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the wing nut m6 inox (part# 61706004) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Wing Nut M6 INOX 61706004”

Your email address will not be published. Required fields are marked *