Tornado Steel Supported Hose 1-1/2″ x 64″ w/Cuffs 18967
$94.99
Genuine OEM steel-supported hose, 1-1/2 inch by 64 inch with cuffs (part# 18967), for Tornado carpet extractors including the 98168 Marathon 1200. In stock in Crystal, MN. Not sure it fits your model? Call us at 763-535-0770.
At 64 inches this is one of the longest vacuum hoses on the machine, supplied with cuffs already fitted at both ends. The steel helix in the wall is what keeps a 1-1/2 inch bore open against the suction these machines pull. Part number 18967 is the genuine OEM part. It also fits the Tornado 98166 20″ Marathon 800 carpet extractor (8 Gallon, 115V). It also fits the Tornado 98167 20″ Marathon 800 carpet extractor (8 Gallon, 230V).
Compatible Models for the Steel Supported Hose 1-1/2″ x 64″ w/Cuffs
This part is shared across a wide run of machines. On the Marathon 1200 family it is fitted to:
- Tornado 98168 12 Gallon Self Contained Carpet Extractor
- Tornado 98168 20″ Marathon 1200 Carpet Extractor (12 Gallon, 115V) — all series
- Tornado 98169 20″ Marathon 1200 Carpet Extractor (12 Gallon, 230V)
- Fits many other machines — call 763-535-0770 and we will confirm fitment for your machine.
- Tornado 98166 20″ Marathon 800 Carpet Extractor (8 Gallon, 115V)
- Tornado 98167 20″ Marathon 800 (8 Gallon, 230V)
Length changes the failure pattern. A long hose gets dragged, stood on, run over by the machine itself and caught in doorways in a way a short jumper never does, so damage here is usually mechanical and usually somewhere in the middle rather than at the ends. Run the whole length through your hands rather than inspecting only the fittings.
The helix is the thing to test for. Flex the hose section by section and feel for a length with no spring in it — that is where the wire has fractured, and that section folds flat under vacuum. It is invisible with the machine off, which is why people replace vacuum motors that were never the problem.
Cuffs are the second wear point even on a long hose, because every time the machine is moved the hose is pulled against them. Grip the hose at each cuff and twist gently: any movement between hose and cuff means the joint has gone and is bleeding air into the vacuum path.
Before ordering, rule out a blockage. Disconnect both ends, hold the hose straight and look through it. A 64 inch run has more places for fibre and debris to lodge than a short one, and a partial plug clears a little on each use, which is exactly why the fault seems to come and go.
Fit following the original routing and avoid any radius tighter than the hose was designed for. A long hose forced round a sharp corner will crush at that point within a season, and the crush becomes the next helix fracture.
Browse every assembly for this machine on the Tornado 98168 Marathon 1200 parts hub, and see the manufacturer’s range at tornadovac.com.
Frequently Asked Questions
What machines does the hose 18967 fit?
It is fitted to the Tornado 98168 12 Gallon Self Contained carpet extractor and the 98168 20″ Marathon 1200 in all series, and it is shared across many other machines. Call 763-535-0770 with your model and serial number and we will confirm fitment before you order It also fits the Tornado 98167 Marathon 800 (8 Gallon, 230V).
How do I find the fault in a long vacuum hose?
Run the whole length through your hands rather than checking the ends. Flex it section by section and feel for a length with no spring — that is a fractured helix, and it folds flat under vacuum while looking perfect with the machine off. Then twist the hose at each cuff; any movement means the joint is bleeding air.
Could it just be blocked?
Very possibly, and it is worth ruling out first. Disconnect both ends, hold the hose straight and look through it. A 64 inch run gives fibre and debris more places to lodge, and a partial plug clears slightly on each use — which is exactly why the fault appears intermittent.
How do I order the Steel Supported Hose 1-1/2″ x 64″ w/Cuffs (part# 18967) or get help?
You can add the Steel Supported Hose 1-1/2″ x 64″ w/Cuffs (part# 18967) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.





