CleanMax Zoom Power Cord Set D434-3714
Genuine CleanMax D434-3714 power cord set for the corded Zoom ZM-400 and ZM-600 commercial uprights. Replace a nicked or damaged cord safely. Call to confirm current pricing.
The CleanMax Zoom power cord set (part# D434-3714) is the genuine cord service part for the corded CleanMax Zoom commercial upright. It is the component that connects the machine to a wall outlet and delivers power to the on/off switch and motor, making it one of the most safety-critical parts on the vacuum and the first thing to inspect when a corded machine will not run.
Compatible Models for the CleanMax Zoom Power Cord Set
- CleanMax Zoom ZM-400
- CleanMax Zoom ZM-600
The D434-3714 power cord set is used on the corded CleanMax Zoom ZM-400 and ZM-600 uprights. If you are unsure which cord component your machine needs, or whether your Zoom uses the detachable pigtail-and-extension-cord design instead, call us at 763-535-0770 and we will confirm the correct part before you order.
What the D434-3714 Power Cord Set Does
Every corded vacuum depends on its cord to deliver line power reliably from the outlet to the motor. On the Zoom commercial platform the cord takes constant abuse: it is wrapped for storage, dragged across floors, pulled around corners, and occasionally run over. CleanMax supplies the cord as a replaceable service part so that a worn or damaged cord can be renewed without touching the rest of the machine, keeping the upright in service and safe to operate.
Signs You Need a New Power Cord Set
Replace the D434-3714 if the vacuum flickers or cuts out when the cord is moved, if the outer jacket is cracked, cut, or has exposed copper anywhere, if a plug end is scorched, melted, or no longer grips the outlet, or if the cord has been crushed or run over. Any of these is a shock and fire hazard, and a damaged cord will typically fail a workplace safety inspection, so it should be taken out of service immediately.
Installation and Fit
Depending on the exact cord configuration, replacing the cord set can involve opening the handle or lower housing to reach the switch and motor connections, so it is best handled by someone comfortable with vacuum wiring or by a service shop. As a genuine CleanMax part it carries the correct gauge and rating for the Zoom motor’s draw. Our technicians at 5415 West Broadway, Crystal, MN 55428 have been servicing CleanMax equipment since 1956 and can install it for you. Browse more CleanMax Zoom handle and bag parts, or learn more at CleanMax.
Frequently Asked Questions
What does the CleanMax Zoom power cord set do on the ZM-400 and ZM-600?
It supplies power to the corded Zoom upright, carrying current from the wall outlet through the machine’s cord system to the on/off switch and motor. It is the complete cord service part for these models.
How do I know if my D434-3714 power cord set needs replacing?
Replace it if the vacuum loses power or cuts in and out when the cord is flexed, if the jacket is cracked, cut, or shows exposed wire anywhere along its length, or if a plug or connector is loose, melted, or scorched. A damaged commercial cord is a shock and fire hazard.
What models is the CleanMax Zoom power cord set (part# D434-3714) compatible with?
It fits the corded CleanMax Zoom ZM-400 and ZM-600 commercial uprights. Call 763-535-0770 to confirm the correct cord set for your machine before ordering.
How do I order the CleanMax Zoom power cord set (part# D434-3714) or get help?
Call us at 763-535-0770 to order the CleanMax Zoom power cord set (part# D434-3714) and confirm current pricing and availability. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your machine.
