Screw 1/4-20 x 1-1/8″ 19999
$2.99
Genuine Tacony OEM 1/4-20 x 1-1/8-inch screw (part# 19999) — long coarse-thread screw for a deep structural joint. Fits the. In stock, Crystal MN. Call 763-535-0770. Fits Tornado 93030, Tornado 93031, CleanMax CM-WAV and Powr-Flite PF2030.
Compatible Models for the Screw 1/4-20 x 1-1/8″
- Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — all series D through J
- Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V
- CleanMax CM-WAV Wide Area Vacuum
- Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum
The 1/4-20 x 1-1/8 in Screw (part# 19999) is a longer 1/4-20 machine screw, 1-1/8 inches long, used on these 30-inch wide-area vacuums where a structural joint stacks thicker parts than a short screw can span. Fits Tornado 93030, Tornado 93031, CleanMax CM-WAV and Powr-Flite PF2030.
These machines are built on the same wide-area platform under different brands and share the great majority of their parts.
This is a genuine Tacony hardware item used on the. The same size fastener may appear elsewhere on the machine and on other Tacony models; call 763-535-0770 to confirm the exact part and its position on your machine.
What the 1/4-20 x 1-1/8 in Screw does
This 1-1/8-inch 1/4-20 screw reaches through deeper joints — where two or more substantial parts are clamped together and a 1/2-inch screw would not engage the far-side thread. Its extra length combined with the strong 1/4-20 coarse thread makes it the fastener for the machine’s thicker structural stack-ups.
Signs the 1/4-20 x 1-1/8 in Screw needs replacing
Replace this screw if it is stripped, bent, or corroded, or if the joint it holds will not draw tight. Because of its length it is easy to start crooked and cross-thread, so a screw that will not seat should be renewed rather than forced. Use the correct 1-1/8-inch length so it fully engages its far-side thread.
Installation and fit
Feed the new 19999 screw through the stacked parts and start it straight into its far-side thread, then tighten to clamp the joint. Do not substitute a shorter 1/4-20 screw, which would not reach the thread. Twin City Vacuum has sold and serviced Tacony equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.
Frequently Asked Questions
What does the 1/4-20 x 1-1/8 in Screw do on the CleanMax CM-WAV?
Its extra 1-1/8-inch length lets it clamp a deeper structural joint that stacks thicker parts than a short 1/4-20 screw could span.
How do I know if my CM-WAV 1/4-20 x 1-1/8 screw needs replacing?
Replace it if it is stripped, bent, or corroded, or will not draw the joint tight. Always use the correct 1-1/8-inch length so it engages its far-side thread.
What models is the 1/4-20 x 1-1/8 in Screw (part# 19999) compatible with?
The Screw 1/4-20 x 1-1/8″ (part# 19999) fits: Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — all series D through J; Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V; CleanMax CM-WAV Wide Area Vacuum; and Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum. If your machine is not on this list, call 763-535-0770 and we will confirm it against your serial number before you order.
The 1/4-20 x 1-1/8 in Screw (part# 19999) is listed for the wide-area commercial upright. If you run a different Tacony model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.
How do I order the 1/4-20 x 1-1/8 in Screw (part# 19999) or get help?
You can add the 1/4-20 x 1-1/8 in Screw (part# 19999) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
