Hose Barb 1/2″ Barb x 1/4″ MPT 7AT004
$5.99
Genuine Tacony OEM hose barb fitting, 1/2 inch barb to 1/4 inch male pipe thread (part# 7AT004), used in the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S solution plumbing.
The Hose Barb 1/2″ Barb x 1/4″ MPT (part# 7AT004) is a genuine Tacony OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the adapter that converts a 1/4 inch male pipe thread port into a 1/2 inch barbed hose connection.
What the Hose Barb 1/2″ Barb x 1/4″ MPT does
Barb fittings hold because the hose is stretched over ridges and then squeezed back down by a clamp, so the seal is made along the whole barbed length rather than at one line. The thread half of the fitting is what lets a flexible hose meet a rigid component, and getting the barb size right is what stops a hose from either splitting on installation or walking off under pressure.
When to replace the Hose Barb 1/2″ Barb x 1/4″ MPT (7AT004)
Replace it when the barbs are nicked or worn smooth, when the pipe thread is damaged, or when the fitting has cracked at the shoulder. A barb that has been reused through several hoses will often show a groove where old clamps sat, and that groove is a leak path.
Hose Barb Barb 7AT004 — fitment and installation notes
Warm a stiff hose before pushing it on rather than forcing it, and seat it fully past the last barb before clamping. Seal the pipe thread with the correct tape or compound applied in the direction of the thread, and keep tape out of the flow path where it can end up in a valve. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Hose Barb 1/2″ Barb x 1/4″ MPT
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Hose Barb 1/2″ Barb x 1/4″ MPT do on the Tornado Marathon SE 900?
Barb fittings hold because the hose is stretched over ridges and then squeezed back down by a clamp, so the seal is made along the whole barbed length rather than at one line. The thread half of the fitting is what lets a flexible hose meet a rigid component, and getting the barb size right is what stops a hose from either splitting on installation or walking off under pressure.
How do I know if my Hose Barb 1/2″ Barb x 1/4″ MPT needs replacing?
Replace it when the barbs are nicked or worn smooth, when the pipe thread is damaged, or when the fitting has cracked at the shoulder. A barb that has been reused through several hoses will often show a groove where old clamps sat, and that groove is a leak path.
What models is the Hose Barb 1/2″ Barb x 1/4″ MPT (part# 7AT004) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Hose Barb 1/2″ Barb x 1/4″ MPT (part# 7AT004) or get help?
You can add the Hose Barb 1/2″ Barb x 1/4″ MPT (part# 7AT004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
