CleanMax ZM-600 Motor Assembly Pulley Shaft D113-1400

The Motor Assembly Pulley Shaft (part# D113-1400) is the complete genuine Tacony OEM motor unit built specifically for the CleanMax ZM-600 commercial upright. ships as a ready-to-install pulley-shaft motor — the configuration the ZM-600 uses to drive its Poly-V belt and steel-strip agitator.

Unlike the straight-shaft motor (D113-1500) fitted to the ZM-200 and ZM-400, the ZM-600 motor carries a pulley on its output shaft to run the wider Poly-V belt (B014-1200). Because the shaft and drive geometry differ, the pulley-shaft and straight-shaft motors are not interchangeable — installing the wrong one will not drive the agitator correctly, so the ZM-600 must use the D113-1400.

Replace the complete motor assembly when the ZM-600 has lost suction, the motor will not spin, it runs loud or hot from worn bearings, smells of burning windings, or repeatedly trips the circuit breaker. Swapping the whole assembly restores full suction and brushroll drive in a single step.

This is a genuine Tacony component manufactured to the original factory specification so it fits the ZM-600 housing and mates to the existing fan hardware and belt without modification.

Compatible Models for the Motor Assembly Pulley Shaft

• CleanMax ZM-600 — Zoom 600 Commercial Upright

Twin City Vacuum has been selling and servicing CleanMax equipment since 1956. All parts are sourced directly from Tacony. Browse the full CleanMax ZM-200 nozzle assembly parts list, or see the range at CleanMax.com.

Frequently Asked Questions

What does the Motor Assembly Pulley Shaft (part# D113-1400) do?

The Motor Assembly Pulley Shaft (part# D113-1400) is the direct-air motor that produces suction on the CleanMax ZM-600 and drives the Poly-V agitator belt from its pulley shaft.

How do I know if my Motor Assembly Pulley Shaft (part# D113-1400) needs replacing?

Replace the D113-1400 if the ZM-600 has weak or no suction, the motor will not start, runs loud or hot, smells of burning, or trips the circuit breaker. Worn bearings and a failed armature are the usual causes.

What models is the Motor Assembly Pulley Shaft (part# D113-1400) compatible with?

The Motor Assembly Pulley Shaft (part# D113-1400) fits only the CleanMax ZM-600 (pulley-shaft, Poly-V belt design). The ZM-200 and ZM-400 use the straight-shaft motor D113-1500 instead.

How do I order the Motor Assembly Pulley Shaft (part# D113-1400) or get help?

You can add the Motor Assembly Pulley Shaft (part# D113-1400) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.