CleanMax ZM-600 Nozzle Housing D017-5014

The CleanMax ZM-600 nozzle housing (part# D017-5014) is the genuine black molded lower body of the cleaning head on the CleanMax Zoom ZM-600 commercial upright. It is the large structural shell that carries the steel agitator, forms the suction inlet and airflow path up to the fan, and provides the mounting points for the base plate, wheels, and belt cover. It is specific to the ZM-600 — the ZM-200 uses B017-3714 and the ZM-400 uses B017-4714, so the housings are not interchangeable between models.

Compatible Models for the CleanMax ZM-600 Nozzle Housing

• CleanMax Zoom ZM-600

The D017-5014 nozzle housing fits the CleanMax Zoom ZM-600 only. The ZM-200 (B017-3714) and ZM-400 (B017-4714) use different housings, so confirm your model is a ZM-600 before ordering. Call us at 763-535-0770 and we will verify the correct housing for your machine.

What the D017-5014 Nozzle Housing Does

The nozzle housing is the foundation of the ZM-600 cleaning head. The steel agitator spins inside it, the base plate and wheels bolt to it, and the suction channel molded into it carries dirt-laden air from the floor up into the fan and bag. Because the ZM-600 is the top of the Zoom line and runs a heavier steel brushroll, the housing has to hold that assembly square and rigid through constant commercial use. A cracked or broken housing leaks suction and lets the agitator wander, so it is one of the few faults that justifies replacing the whole lower body.

Signs You Need a New Nozzle Housing

Replace the D017-5014 if the housing is cracked or has broken mounting bosses so the base plate, belt cover, or wheels no longer seat tightly, if the suction channel is split and leaking airflow, or if impact damage has warped it so the steel agitator no longer sits square to the floor. A machine that has lost cleaning performance or developed a suction leak after a hard drop often needs the housing rather than a belt or filter.

Installation and Fit

Replacing the housing is a full teardown of the cleaning head — the steel agitator, base plate, wheels, belt, and motor connections all transfer to the new housing — so it is best handled by a service shop or an experienced technician. Because it is the genuine ZM-600 housing it matches every mounting point exactly. Our technicians at 5415 West Broadway, Crystal, MN 55428 have been servicing CleanMax equipment since 1956. Browse more CleanMax Zoom ZM-400 nozzle parts, or learn more at CleanMax.

Frequently Asked Questions

What does the D017-5014 nozzle housing do on the CleanMax ZM-600?

It is the molded lower body of the cleaning head that holds the steel agitator, forms the suction inlet and airflow path, and provides the mounting points for the base plate, wheels, and belt cover.

How do I know if my D017-5014 needs replacing?

Replace it if the housing is cracked, has broken mounting bosses, is leaking suction from a split channel, or is warped from impact so the steel agitator no longer sits square to the floor.

What models is the D017-5014 nozzle housing compatible with?

It fits the CleanMax Zoom ZM-600 only. The ZM-200 uses B017-3714 and the ZM-400 uses B017-4714. Call 763-535-0770 to confirm your model.

How do I order the D017-5014 nozzle housing or get help?

You can add the CleanMax ZM-600 nozzle housing (part# D017-5014) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your machine.