Tornado Screw 5/16-18 x 1-1/2 in. X8216
$2.99
Genuine OEM 5/16-18 x 1-1/2 in. screw (part# X8216) for commercial high-speed burnishers — the longest of the 5/16-18 fasteners on the Brute Force drawings. Fits all Tornado Brute Force burnishers (see full list below).
The X8216 is a 5/16-18 screw, 1-1/2 inches long. It appears on every drawing in the Brute Force burnisher book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on both Brute Force 2000 Dust Control (98486) drawings, in the group around the pad drive and main pulley. It is a shared part used across Tornado machines — see the full list of models below.
Length is what distinguishes this screw from the others on the same drawings. The book lists 5/16-18 fasteners in 3/4 inch (X8215B), 1 inch (03361) and this 1-1/2 inch size, and they are not interchangeable: a screw that is too short does not get enough thread engagement to hold the load, and one that is too long bottoms out or protrudes into something it should not touch. On a bench covered in loose hardware they look nearly identical, which is why it is worth checking the length against the callout before reassembly.
Replace the X8216 if the threads are galled or stretched, if the head is damaged, or if it will not hold torque. Pay attention to the first inch of thread: a screw that has been cross-threaded during an earlier rebuild will feel fine going in and then bind, and forcing it damages the female thread as well. Fit it with the lock washer (01577) and plain washers shown at its callout — the washer stack is part of the specification, not an optional extra.
If you are rebuilding the pad drive, measure what you take out and lay the hardware out in order; it saves guessing at reassembly. The screw is shared hardware across the Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you want the hardware for a callout listed.
Compatible Models
- Tornado models:
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- P Series 2000 Glazer (230V) — 98487
Frequently asked questions
Where is the 5/16-18 x 1-1/2 in. screw (part# X8216) used on a Brute Force burnisher?
It appears on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B) and on both 98486 drawings, in the pad drive and main pulley area.
How is the X8216 different from the other 5/16-18 screws on the drawing?
Only in length. The drawings also list 5/16-18 screws in 3/4 inch (X8215B) and 1 inch (03361). They are not interchangeable — too short loses thread engagement, too long bottoms out or fouls other parts.
How do I know if my X8216 screw needs replacing?
Replace it if the threads are galled, stretched or cross-threaded, if the head is damaged, or if it will not hold torque. A screw that binds part-way in has been cross-threaded and will damage the female thread if forced.
What models is the 5/16-18 x 1-1/2 in. screw (part# X8216) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the 5/16-18 x 1-1/2 in. screw (part# X8216) or get help?
You can add the screw (part# X8216) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet