Find genuine Mytee HP90 vacuum motor parts and recovery tank parts for Model HP90 and HP90-SS. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
87. Vacuum Motor Gasket – G00488. 3.25 in Vacuum Motor Spacer – H50325. 1/4 in Stainless Flat Washer – H21024. Lock Washer 1/4 in, Stainless – H21389. Bolt 1/4-20 x 4 in Hex, Zinc – H09690. 3-Stage Low-Amp Vacuum Motor – C302LA92. 2 in Vinyl Cuff-Lynx Male Starter – H135V38. 10-32 Kep Nut – H27393. Flat Washer #10, Stainless – H28994. Screw 10-32 x 1/2 in Socket Head – H38966. 2-Position Rocker Switch – E53667. Screw 8-32 x 3/8 in Socket Head, Black – H24668. Switch Plate, HP90 – H63569. Black Vacuum Tank, HP90 – P79673. 1-1/2 in Steel Lock Nut – H31476. 1-1/2 in MPT PVC Adapter – P52077. PVC Pipe 1-1/2 in x 9-1/2 in – PH633-979. 7 in Vacuum Lid Gasket – G09180. 7 in Clear Vacuum Tank Lid – G09081. Screw #8 x 5/8 in Phillips Oval, Stainless – H30482. Foam Filter – G02283. 1.9 in Screen Mesh Filter – G09784. PVC Pipe 1-1/2 in – PH633-.2585. 2 in Inlet Elbow Assembly – A92686. 1-1/2 in Drain Valve – H22571. 1/4 in NPT Nut – B15621. 9/16 in ID Flat Washer – H21221. 9/16 in ID Flat Washer – H21220. 1/4 in 45 Degree Brass Street Elbow – B13019. 1/4 in 90 Degree Brass Street Elbow – B10370. Vacuum Shut-Off Float Switch – E37378. 1-1/2 in PVC Slip Adapter – P50272. Buna Hand Tool Valve Gasket – G10591. Starter Cuff Gasket – G22374. Gasket 1-1/2 in PVC – G22275. Bulkhead Washer 1-1/2 in PVC – H305This page covers the recovery side of the HP90 Stingray: the black vacuum tank, the clear 7-inch lid and lid gasket, the float shut-off switch, the inlet elbow and screen filter, the 1-1/2-inch drain valve and its PVC fittings, the C302LA 3-stage vacuum motor with its gasket, spacers and foam filter, the Cuff-Lynx inlet, and the rocker switches and switch plate. Mytee does not sell the tank, switch plate, PVC pipe or hardware on its website; those rows say Call, and we can order them for you. Twin City Vacuum has been selling and servicing cleaning equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Mytee HP90 Recovery Tank & Vacuum Motor Parts List
Frequently Asked Questions
What Mytee HP90 vacuum motor parts are on this diagram?
The C302LA 3-stage low-amp vacuum motor, its G004 gasket, the three H503 spacers and H096 bolts that hold it, the G022 foam filter and the G223 gasket and H135V Cuff-Lynx at the inlet.
My HP90 has weak suction. Which parts should I check?
Check the clear lid and G091 gasket, the drain valve, the screen filter and the Cuff-Lynx connections before the motor. Most suction loss is an air leak.
Why does my HP90 vacuum shut off by itself?
The E373 float switch stops the vacuum when the recovery tank is full. If it stops with an empty tank, clean the float, then check the switch and its E632 relay.
Do these parts fit the HP90-SS?
Yes. The HP90 and HP90-SS share one Mytee parts book, so every part on this page fits both.
Need another area of the machine? Go back to the Mytee HP90 Stingray parts diagrams, browse parts for every Mytee machine, or see Mytee’s own HP90 Stingray page.























