Hose Clamp 33107

Compatible Models for the Hose Clamp

• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series H and J
• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V — Series J
• CleanMax CM-WAV Wide Area Vacuum
• Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum

The 6 in Worm Gear Clamp (part# 33107) is a 6-inch worm-gear hose clamp used on these 30-inch wide-area vacuums to seal and secure a large hose or duct connection in the airway. Fits Tornado 93030, Tornado 93031, CleanMax CM-WAV and Powr-Flite PF2030.

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

This is a genuine Tacony hardware item used on the. The same size fastener may appear on other Tacony machines; call 763-535-0770 to confirm the exact part for your model.

What the 6 in Worm Gear Clamp does

This worm-gear clamp wraps a hose or duct and tightens with a screw drive to squeeze the connection airtight against its fitting. At 6 inches it suits the large-diameter ducting on a wide-area machine, holding the hose on its port so no air leaks at the joint. A secure clamp keeps the wide airway sealed from the head to the motor.

Signs the 6 in Worm Gear Clamp needs replacing

Replace the worm-gear clamp if its band is rusted or cracked, the screw drive is stripped so it will not tighten, or the hose it holds is leaking or pulling off because the clamp no longer grips. A hose that blows off under suction, or an audible leak at a clamped joint that retightening does not cure, means the clamp should be renewed.

Installation and fit

Slide the new 33107 clamp over the hose and onto the fitting, position it over the sealing land, and tighten the worm screw until the hose is gripped firmly and airtight without crushing it. Check the joint holds under suction before use. Twin City Vacuum has sold and serviced Tacony equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the 6 in Worm Gear Clamp do on the CleanMax CM-WAV?

It wraps and tightens around a large hose or duct to seal and secure that connection in the wide airway so no air leaks at the joint.

How do I know if my CM-WAV worm gear clamp needs replacing?

Replace it if the band is rusted or cracked, the screw drive is stripped so it will not tighten, or the hose leaks or pulls off because the clamp no longer grips.

What models is the 6 in Worm Gear Clamp (part# 33107) compatible with?

The Hose Clamp (part# 33107) fits: Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series H and J; Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V — Series J; CleanMax CM-WAV Wide Area Vacuum; and Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum. If your machine is not on this list, call 763-535-0770 and we will confirm it against your serial number before you order.

The 6 in Worm Gear Clamp (part# 33107) is listed for the wide-area commercial upright. If you run a different Tacony model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the 6 in Worm Gear Clamp (part# 33107) or get help?

You can add the 6 in Worm Gear Clamp (part# 33107) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.