Screw #10-32 x 3″ 33630

Compatible Models for the Screw #10-32 x 3″

• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series H and J
• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V — Series J
• CleanMax CM-WAV Wide Area Vacuum
• Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum

The #10-32 x 3 in Long Screw (part# 33630) is a long #10-32 screw, 3 inches in length, used on these 30-inch wide-area vacuums where a fastener must reach through stacked parts or a deep boss. Fits Tornado 93030, Tornado 93031, CleanMax CM-WAV and Powr-Flite PF2030.

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

This is a genuine Tacony hardware item used on the. The same size fastener may appear on other Tacony machines; call 763-535-0770 if you would like us to confirm the exact part for your model.

What the #10-32 x 3 in Long Screw does

The extra length of this 3-inch #10-32 screw lets it pass through several stacked components or a deep housing section and still thread into its captive nut or boss on the far side. It is used at a specific deep joint on these machines where a standard short screw could not span the parts being clamped together.

Signs the #10-32 x 3 in Long Screw needs replacing

Replace this screw if its threads are stripped or galled, the head is stripped so it can no longer be driven, or it is bent or corroded. Because of its length it is easy to cross-thread on reassembly, so a screw that will not draw the joint tight should be renewed rather than forced. Using the correct 3-inch length matters — a shorter screw will not engage its far-side thread.

Installation and fit

Feed the new 33630 screw through the stacked parts and start it squarely into its far-side nut or boss to avoid cross-threading, then tighten to clamp the joint. Do not substitute a shorter screw, which would not reach the thread. Twin City Vacuum has sold and serviced Tacony equipment since 1956, and every part is sourced directly from Tacony. Browse more CleanMax parts, or learn more at CleanMax.

Frequently Asked Questions

What does the #10-32 x 3 in Long Screw do on the CleanMax CM-WAV?

Its 3-inch length lets it pass through stacked parts or a deep boss and thread into the far side, clamping a deep joint a short screw could not span.

How do I know if my CM-WAV long screw needs replacing?

Replace it if the threads or head are stripped, or it is bent or corroded so it will not draw the joint tight. Always use the correct 3-inch length.

What models is the #10-32 x 3 in Long Screw (part# 33630) compatible with?

The Screw #10-32 x 3″ (part# 33630) fits: Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series H and J; Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V — Series J; CleanMax CM-WAV Wide Area Vacuum; and Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum. If your machine is not on this list, call 763-535-0770 and we will confirm it against your serial number before you order.

The #10-32 x 3 in Long Screw (part# 33630) is listed for the wide-area commercial upright. If you run a different Tacony model and are unsure whether this part fits, call 763-535-0770 and we will confirm it against your machine.

How do I order the #10-32 x 3 in Long Screw (part# 33630) or get help?

You can add the #10-32 x 3 in Long Screw (part# 33630) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.