Tornado Strike Brushroll Complete K47626443

The Brushroll, complete (part# K47626443) is the bristle roll that does the mechanical half of the Tornado Strike’s cleaning. Suction lifts what is loose; the brushroll is what gets grit out of the pile in the first place. Tacony supplies it as a complete assembly rather than as a bare roll, so the end bearings come with it and the whole wearing item is changed in one go.

Compatible Models for the Brushroll Complete

• Tornado Strike Cordless Upright Vacuum — Model TV190-W10-U

This is a Strike-only component: Tacony’s parts records list the Tornado Strike TV190-W10-U as the single machine that takes part# K47626443, so there is no cross-model substitution to worry about when you order it.

What the Brushroll Complete does

Carpet holds soil down in the base of the pile where airflow alone cannot reach it. The roll’s bristles flick that material up into the airstream, and the same action lifts crushed pile so the carpet looks refreshed rather than merely vacuumed. Because the Strike drives the roll from its own motor rather than from airflow, brush speed does not fall away on thick carpet — but that only helps while the bristles are long enough to reach the backing.

Signs the Brushroll Complete needs replacing

Bristles worn short or splayed are the main one, and the test is simple: lay a straight edge across the roll, and if the bristles no longer stand proud of the roll body by a clear margin they are finished. Also replace it when the roll has gone out of round and the machine thumps, when hair and thread have cut a groove into the roll body, when an end bearing is noisy or has seized, or when carpet pile is no longer being lifted even though the belt is new and the brush motor is running at full speed.

Fitting the Brushroll Complete

Open the brush housing top cover, slip the belt off, and lift the roll out of its seats. Clear hair and thread from the bearing areas of the housing before the new one goes in, and check the belt at the same time — a worn belt will not get the most out of a new roll. Seat the replacement in both bearing pockets, loop the belt back over, and turn it a full revolution by hand to confirm it runs true before the cover goes back on.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. You can browse the rest of the machine on our Tornado Strike parts pages, and the manufacturer publishes specifications at tornadovac.com.

Frequently Asked Questions

What does the Brushroll do on the Tornado Strike?

It is the bristle roll that agitates the carpet pile, flicking soil up out of the backing so the airflow can carry it away, and lifting crushed pile as it passes. It is driven by the Strike’s dedicated brush motor through the drive belt.

How do I know if my Brushroll needs replacing?

Bristles worn short or splayed so they no longer stand clearly proud of the roll body — check with a straight edge. Also a roll that has gone out of round and thumps, grooves cut into the body by hair and thread, or a noisy or seized end bearing.

What models is the Brushroll Complete (part# K47626443) compatible with?

The Tornado Strike TV190-W10-U cordless upright vacuum, and only that machine. Tacony’s parts records list no other model that takes part# K47626443.

How do I order the Brushroll Complete (part# K47626443) or get help?

You can add the Brushroll Complete (part# K47626443) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.