Tornado Strike Wand K54812423

The Wand (part# K54812423) is the extension tube that turns the Tornado Strike from a floor machine into an above-floor one. It clips into its holder on the body, pulls free when needed, and accepts the crevice tool and upholstery nozzle at its far end.

Compatible Models for the Wand

• Tornado Strike Cordless Upright Vacuum — Model TV190-W10-U

This is a Strike-only component: Tacony’s parts records list the Tornado Strike TV190-W10-U as the single machine that takes part# K54812423, so there is no cross-model substitution to worry about when you order it.

What the Wand does

Reach is the whole point. A wand lets an operator get to stair edges, skirting, upholstery and high corners without dragging the machine around or crouching, which is the difference between a room being cleaned properly and being cleaned where the head fits. It also has to hold a seal at both ends under full suction while being handled roughly, and stow securely enough that it does not fall out when the machine is carried.

Signs the Wand needs replacing

Replace it when it is cracked, split or bent so tools no longer seat squarely; when either end has worn so a tool or the hose cuff drops off in use; when it has been crushed enough to whistle or leak under suction; or when it will no longer clip into its holder and rides loose. A wand that has to be held onto the hose to stop it separating is finished.

Fitting the Wand

No tools needed — the wand pushes onto the hose cuff and the tools push onto the wand. Check both ends are clean before fitting, since compacted fibre inside the cuff is a common reason a new wand feels loose. Clip it into its holder and give it a firm pull to confirm it stays put, then test suction with a tool fitted.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. You can browse the rest of the machine on our Tornado Strike parts pages, and the manufacturer publishes specifications at tornadovac.com.

Frequently Asked Questions

What does the Wand do on the Tornado Strike?

It is the extension tube for above-floor cleaning — it connects to the machine’s flexible hose and accepts the crevice tool and upholstery nozzle, and it stows in its own clip on the body.

How do I know if my Wand needs replacing?

Cracks, splits or a bend that stops tools seating squarely; worn ends that let a tool or the hose cuff drop off; a crushed section that whistles or leaks under suction; or a wand that will no longer clip into its holder.

What models is the Wand (part# K54812423) compatible with?

The Tornado Strike TV190-W10-U cordless upright vacuum, and only that machine. Tacony’s parts records list no other model that takes part# K54812423.

How do I order the Wand (part# K54812423) or get help?

You can add the Wand (part# K54812423) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.