Tornado Strike Ejector Complete, Filter Cover K47755830

The Ejector Complete for the filter cover (part# K47755830) is the sprung release on the back of the Tornado Strike TV190-W10-U that pops the filter cover open when you press it. It is a small assembly that gets used every time a bag is changed, which is why it is one of the first mechanical parts on the machine to wear.

Compatible Models for the Ejector Complete, Filter Cover

• Tornado Strike Cordless Upright Vacuum — Model TV190-W10-U

This is a Strike-only component: Tacony’s parts records list the Tornado Strike TV190-W10-U as the single machine that takes part# K47755830, so there is no cross-model substitution to worry about when you order it.

What the Ejector Complete, Filter Cover does

It combines the press lever, its pivot and the spring that returns it, supplied as one assembly so the spring tension is right out of the box. Pressing it lifts the catch clear of the cover and gives the cover the nudge it needs to swing open. Because the whole mechanism is small and moulded, it depends on the spring staying in place — nothing about it can be adjusted once the spring has taken a set.

Signs the Ejector Complete, Filter Cover needs replacing

The usual complaint is a cover that will not open without being prised, or one that will not stay latched and swings open in use. Press the lever with the cover off: if it does not spring back briskly, or if it feels gritty, the mechanism is done. A lever that has broken off flush is obvious; a lever that merely feels soft is the one that gets ignored until an operator forces the cover and cracks the housing.

Fitting the Ejector Complete, Filter Cover

Unplug the battery first. The ejector sits in its pocket in the rear housing and comes out once its retaining screw is removed. Fit the new assembly dry — no grease, which only collects dust here — and check that the lever travels its full stroke and returns on its own before you refit the cover. Then open and close the cover half a dozen times by hand to confirm it latches and releases cleanly every time.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. You can browse the rest of the machine on our Tornado Strike parts pages, and the manufacturer publishes specifications at tornadovac.com.

Frequently Asked Questions

Does this part include the spring?

Yes. Tacony supplies part# K47755830 as a complete ejector assembly including the spring, which is why it is described as Ejector Complete.

My filter cover will not stay shut. Is this the part?

Very likely, but check the cover seal first — a hardened or misplaced seal can hold the cover proud so the catch never engages. If the seal is good and the cover still pops open, the ejector or its spring is the cause.

Can I just leave a broken ejector and open the cover by hand?

It will work for a while, but people end up levering the cover with a screwdriver, and that is how hinge bosses and cover edges get cracked. At this price the ejector is much cheaper than the cover it protects.

How do I order the Ejector Complete, Filter Cover (part# K47755830) or get help?

You can add the Ejector Complete, Filter Cover (part# K47755830) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.