Find genuine Carpet Pro CPU-3N replacement parts for Model CPU-3N. Can’t find your part? Call us at 763-535-0770.
Click any numbered part in the diagram below, or any row in the table, to open that part’s page in a new tab.
01. Carpet Pro Nozzle Housing with Furniture Guard (Black Replacement Part) C625-011102. Lens – N19-CL03. Washer A430-040504. Screw, #8-18 x 5/8 in. A732-831404. Screw, #8-18 x 5/8 in. A732-831404. Screw, #8-18 x 5/8 in. A732-831405. Furniture Guard Black – A0306. Nozzle Hose (call 763-535-0770)07. Hose Retainer (call 763-535-0770)08. Metal Agitator Assembly D012-250009. Brushroll Belt B014-071410. Carpet Pro Pedal Frame B020-0100B11. Foot Pedal 54.01612. Foot Pedal Spring – B020-040013. Carpet Pro Belt Cover B020-103114. E-Clip A732-020015. Pedal Shaft – B020-030016. Carpet Pro Light Socket B625-011417. Carpet Pro 6v Light Bulb A350-200018. Combination Screw A732-530019. Headlight Reflector Plate A2820. Felt Packing A0921. Vented Support Fitting B017-120022. Baseplate Stud CM01101224. Carpet Pro CPU-3N Baseplate Assembly Screw-On Type C015-150025. Baseplate Seal CM03100126. Baseplate Wheel B010-191326. Baseplate Wheel B010-191327. Baseplate Wheel Axle B010-050027. Baseplate Wheel Axle B010-050030. Baseplate Plate Screw – A732-200030. Baseplate Plate Screw – A732-2000This is the nozzle assembly drawing for the Carpet Pro CPU-3N commercial upright. It covers the nozzle housing and furniture guard, the headlight (lens, socket, 6V bulb and reflector plate), the foot pedal and its frame, shaft and spring, the belt cover, the agitator and drive belt, and the CPU-3N screw-on baseplate with its seal, wheels, axles and screws. The same drawing is shared with the CPU-3QD, which uses the quick-disconnect baseplate shown on the left.
Frequently Asked Questions
What parts are in the Carpet Pro CPU-3N nozzle assembly?
The CPU-3N nozzle assembly covers the nozzle housing with furniture guard, the headlight lens, socket, bulb and reflector, the foot pedal with its frame, shaft and spring, the belt cover, the agitator and belt, and the CPU-3N baseplate with its seal, wheels, axles and screws.
How do I find the right part number on this diagram?
Find the number printed next to the part on the drawing, then look for the same number in the # column of the table. Clicking a number on the drawing opens that part’s page in a new tab.
Does the CPU-3QD use the same nozzle parts?
The CPU-3N and CPU-3QD share this nozzle drawing. Everything above the baseplates is common to both; the CPU-3N uses the screw-on baseplate shown on the right of the drawing, and the CPU-3QD uses its own baseplate on the left.
What if the part I need is not listed?
Call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has serviced Carpet Pro equipment since 1956 and can find the right part for your machine.
See every Carpet Pro CPU-3N drawing on the CPU-3N parts page, or browse all Carpet Pro vacuum parts.

























