Tornado BDSO 20/21 Stand-On Scrubber Parts

Genuine Tornado BDSO 20/21 parts for the TS120-S59-UC, TS120-S59-UG and TS120-S59-UE stand-on scrubbers, with every assembly on the machine covered. Can’t find your part? Call us at 763-535-0770.

How to choose the right Tornado BDSO 20/21 parts

The Tornado BDSO 20/21 is a stand-on disc scrubber built on the TS120-S59-U platform and sold in three battery configurations: the TS120-S59-UC with lead-acid batteries, the TS120-S59-UG with AGM batteries and the TS120-S59-UE with TPPL batteries. All three share the same frame, brush base, squeegee and recovery system, so the great majority of Tornado BDSO 20/21 parts fit every version of the machine. The battery compartment, the charger and the wiring are where the three differ, so check the model badge before ordering anything from those assemblies.

The machine scrubs a 20-inch path at up to 22,000 square feet per hour, puts 48.5 pounds of down pressure on the disc at 140 RPM and turns inside a 53-inch radius while still fitting through a standard doorway. That combination is hard on wear items. At that down pressure the pad driver or brush, the brush base bearings and the squeegee blades go first, followed by the solution valve, the vacuum motor filter and the drive wheel. Those are the Tornado BDSO 20/21 parts most operators reorder, and they are the ones worth keeping on the shelf.

Matching Tornado BDSO 20/21 parts to your serial number

Tornado revised several assemblies during the production run. The central frame, the brush base control, the suction assembly, the squeegee, the frame, the control panel, the solution tank, the squeegee support and the electrical layout each have more than one version, every one tied to a serial-number range. The assembly pages on this site show those ranges as labelled blocks on a single page, so you read your serial plate once and then order Tornado BDSO 20/21 parts from the block that matches your machine. If your serial number falls close to a break point, call us and we will confirm it against the factory parts book before you buy.

Ordering Tornado BDSO 20/21 parts

Pick the assembly your part belongs to, click the numbered hotspot on the schematic or the matching row in the parts table, and add it to the cart. Anything we do not stock is shown as a call-us row rather than left off the drawing, so the diagram always matches the machine in front of you. We have been servicing commercial floor equipment at 5415 West Broadway in Crystal, Minnesota since 1956, and our staff can confirm a part number over the phone at 763-535-0770 before you order.

Browse the full Tornado cleaning equipment parts range, see every Tornado BDSO 20/21 parts diagram, or compare Tornado BDSO 27/28 parts for the larger machine in the same family. The manufacturer publishes full specifications at tornadovac.com.

Tornado BDSO 20/21 parts: frequently asked questions

Do Tornado BDSO 20/21 parts fit all three battery models?

Most do. The TS120-S59-UC, TS120-S59-UG and TS120-S59-UE share the frame, brush base, squeegee, tanks and recovery system. The battery, charger and electrical-layout assemblies are the exceptions, and those are listed separately on their own pages.

Where is the serial number on a Tornado BDSO 20/21?

On the machine data plate. You need it because the central frame, brush base control, suction, squeegee, frame, control panel, solution tank, squeegee support and electrical layout all changed at specific serial breaks during production.

What is the difference between the BDSO 20/21 and the BDSO 27/28?

Cleaning path and deck size. The 20/21 runs a 20-inch disc; the 27/28 is the larger machine. They are different parts books, so do not order Tornado BDSO 20/21 parts for a 27/28 or the reverse without checking the part number.

Showing 41–60 of 108 results