Tornado Windshear 3200 replacement parts for Model 98774. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
1. Housing, Left, Non-Motor Side, Carpet Dryer – X137010. Tornado Nylon Insert Lock Nut 5/16 in. Stainless – X8248SS11. Grill, Carpet Dryer, Injection Molded with Tabs – X137812. Switch Mounting and Back Support, Carpet Dryer – X137916. Power Cord, Carpet Dryer, 20 ft., 18/3 SJTW – X971913. Wire Jumper, Switch, Carpet Dryer – X143117. Switch, 3-Speed, Carpet Dryer – X983018. Screw, Pan Head Phillips, 6-32 x 3/8 in., Machine, Zinc – 0173419. Screw – – A732-831419. Screw – – A732-83142. Housing, Right, Motor Side, Carpet Dryer – X137120. Warning Label – X1550 (call to order)21. Serial Number Label – X845922. Kickstand, Carpet Dryer – X887423. P Clip – 02-4279-0000 (call to order)24. Qualified Made In The USA Label – X10033. Control Panel Assembly with Switch and Switch Mount – X1372A4. Fan, LC Squirrel Cage, Carpet Dryer – X13735. Knob, Switch, Carpet Dryer – X13746. Foot, Left, Dryer Kickstand, Soft – X13757. Foot, Right, Dryer Kickstand, Soft – X13768. Bolt, 5/16-18 x 3-1/4 in. Hex Cap Screw, Grade 5, Zinc – X13779. Washer, 5/16 in. SAE Flat, Zinc – X821815. Control Panel Label – X1504-TOR (call to order)14. Motor, Carpet Dryer, 115 VAC, 0.6 HP, with 18uF Capacitor – X1441-115.2-AL14C. Capacitor, 18uF, Carpet Dryer Motor – X1441CThis is the main assembly of the Tornado Windshear 3200 (Model 98774), the 115V centrifugal carpet dryer sold by Powr-Flite as the PDS1 Powr-Dryer. The machine is built around a two-piece clamshell housing that forms the blower scroll: the left, non-motor half and the right, motor half bolt together around a squirrel-cage fan driven by a 0.6 HP capacitor-run motor. The control panel, three-speed switch and jumper wire sit in the motor-side shell, the intake grill guards the fan, and the wire kickstand and its soft feet set the angle the machine blows at. Most of the parts below are shared with other Tornado and Powr-Flite air movers and dryers, so each part page lists its own full fitment.
Frequently Asked Questions
Which Tornado air mover is Model 98774?
Model 98774 is the Tornado Windshear 3200, the 115V centrifugal carpet dryer and air mover built on the PDS1 platform. It is the three-speed machine whose squirrel-cage blower throws air out along the floor rather than across the room, which is what lets it dry under carpet and along walls. Its Powr-Flite equivalent is the PDS1 Powr-Dryer, and most parts on this drawing are shared between the two.
How do I find the right part on this page?
Every numbered callout on the drawing above matches a numbered row in the table below. Click a dot on the diagram, or click the part description or part number in the table, and you will land on that part’s own page with its price, fitment and photo. If you can see the part on the drawing but cannot tell which number it carries, call us at 763-535-0770 and we will identify it for you.
Why do three rows say “call” instead of showing a price?
Item 15 (Control Panel Label X1504-TOR), item 20 (Warning Label X1550) and item 23 (P Clip 02-4279-0000) are not currently listed by the manufacturer as separately orderable parts, so we will not invent a price for them. They are still on the drawing and still on this table so the numbering stays complete. Call us at 763-535-0770 and we will tell you what is actually available.
What is item 14C on this diagram?
Item 14C is the 18uF run capacitor (part# X1441C) that belongs with the dryer motor. The motor (part# X1441-115.2-AL) is supplied with a matched capacitor, but the capacitor is also a separately catalogued part with its own compatibility, so it has its own callout, its own row and its own page. A motor that hums but will not start spinning until you flick the fan by hand usually needs the capacitor, not the motor.
Looking for a different Windshear assembly or another Tornado air mover? See all Tornado Windshear air mover parts, or call Twin City Vacuum at 763-535-0770. We have been servicing commercial floor-care equipment at 5415 West Broadway, Crystal, MN 55428 since 1956.















