Tornado Pac-Vac 6 Roam replacement parts for Models 93016, 93016B-1 and 93016C-1. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
1. Top Cover – B352-05002. Inlet Elbow – B352-06003. Inlet Seal – B352-48004. Screw #8 x 5/8″ – A732-83005. Paper Vacuum Bag (10 Pack) – C352-25006. Cloth Shake Out Bag (6 Qt) – C352-14007. Deuter Aircomfort Pac-Vac Harness – X11528. Bag Compartment Seal – B352-61009. Harness Frame – X138210. Screw #10 x 3/4″ – A352-810011. Metal Latch – A352-330012. Rivet – X975813. Washer – 0157514. Back Plate 6 Qt. – B352-044315. Vacuum Hose Stretch 2″ x 6′ Straight Cuff – A352-690019. Rubber Foot – X126027. Double Bend Chrome Wand – CT171-CS28. Yellow Front Cover 6 Qt. – BAA001310829. Battery Cover – X138330. Terminal Wall – X138431. Terminal Block – X120132. Spring Loaded Plunger – X120733. ON/OFF Switch DPST – 3296634. Screw #8-18 x 5/8″ – A732-831435. Screw #4 x 1/2″ – X119836. Spring – X120637. Screw #8-18 x 3/8″ – X1263Tornado Pac-Vac 6 Roam upper assembly parts
Find genuine Tornado Pac-Vac 6 Roam upper assembly replacement parts for Models 93016, 93016B-1 and 93016C-1. This is the body and harness end of the cordless Roam: the top cover, inlet elbow and inlet seal, the bag compartment and its seal, the Deuter shoulder harness with its frame, rivets and belt clip, the back plate and yellow front cover, the battery cover, terminal wall and terminal block, the on/off switch, and the fasteners that hold it all together. The 36-volt lithium battery and its charger are listed here as Not Shown items. Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions
Which Pac-Vac 6 Roam models does this upper assembly diagram cover?
All three revisions — 93016, 93016B-1 and 93016C-1. Tornado publishes one upper assembly sheet for the Roam and it is identical across the revisions, so every part on this page fits all three machines.
Why do some rows on this page have no dot on the diagram?
Six of them are honest gaps rather than missing dots. The shoulder rivets and tool belt clip are sub-callouts of the harness at number 7 and share its balloon; the copper wand ring carries no callout on the factory sheet at all; and the battery and its charger are listed in the parts list as Not Shown items, so there is nothing on the drawing to point at.
The harness on my Roam has gone slack on one side. What do I need?
Check the shoulder rivets (A352-9402 male, A352-9401 female) and the harness frame (X1382) before replacing the harness itself. A rivet hole that has elongated in the frame lets the harness pull crooked, and the frame and rivets together cost a fraction of the Deuter harness.
How do I order Pac-Vac 6 Roam upper assembly parts or get help?
Click any part in the table above to open its product page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can confirm the right part for your machine.
Looking for another assembly? See the full Tornado Pac-Vac 6 Roam parts breakdown or call us at 763-535-0770.