Find genuine Tornado BDSO 20/21 replacement parts for Model TS120-S59-UC, TS120-S59-UG and TS120-S59-UE. Can’t find your part? Call us at 763-535-0770.
Click a numbered dot on the diagram, or the matching row in the table below it, to open that part in a new tab.
Tornado revised the central frame four times during the production run of the BDSO 20/21, so this page carries all four drawings in serial order, oldest first, each with its own parts table. The central frame is the backbone of the machine: it carries the steering column and its crown gear, the frame wiring and its terminal board and block, and the mounting points that tie the brush base, the drive wheel and the tanks together. Check the serial number on your machine’s data plate and work from the matching block below — the revisions look similar but do not share every part.
Central Frame — Up to S/N 20000715
Central Frame — S/N 20000716 – 20001885
Central Frame — S/N 20001886 – 20002056
Central Frame — From S/N 20002057
Tornado BDSO 20/21 central frame parts FAQ
How do I know which central frame drawing applies to my machine?
Read the serial number on the machine data plate and match it to the labelled block on this page. The four drawings are shown in serial order, oldest first, and each block states the range it covers.
Which parts changed between the central frame revisions?
The horn cover is the clearest example – machines up to S/N 20001885 take part# 21701060 and machines from S/N 20001886 take part# 21701070. Most other parts carry across all four revisions, but order from the block that matches your serial number rather than assuming.
Does the central frame differ between the TS120-S59-UC, UG and UE?
No. The three BDSO 20/21 models differ only by battery type and share the central frame assembly; it is the serial number, not the battery variant, that decides which revision applies.
Why are four rows on these diagrams marked call us?
The conical washer (part# 60514001), nut (part# 60211403), screw M8 x 20 (part# 60100802) and bearing support (part# 61442501) are not sold to us separately. The rows stay on the tables so the numbering matches the drawings – call 763-535-0770 and we can usually still source them.
Back to all Tornado BDSO 20/21 parts diagrams, or browse the Tornado BDSO 20/21 parts category. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428 — servicing commercial floor equipment since 1956. Call 763-535-0770.


































