Find genuine Tornado BDSO 20/21 replacement parts for Model TS120-S59-UC, TS120-S59-UG and TS120-S59-UE. Can’t find your part? Call us at 763-535-0770.
Click a numbered dot on the diagram, or the matching row in the table below, to open that part in a new tab.
The drive wheel assembly is what moves the Tornado BDSO 20/21 stand-on scrubber. The geared traction motor drives the upper sprocket, a roller chain carries that drive down to the lower sprocket on the drive wheel pin, and the wheel runs in bearings inside the support housing while the steering crown gear turns the whole assembly. Everything on this drawing carries the weight of the machine, its batteries, a full solution tank and the operator standing on the deck, which is why the chain, the sprockets and the wheel bearing are the items most often replaced.
Tornado BDSO 20/21 drive wheel parts FAQ
What usually fails first in the Tornado BDSO 20/21 drive wheel assembly?
The chain and sprocket set. The chain (part# 61510007) stretches, the upper sprocket (part# 46810060) hooks first because it turns fastest, and the lower sprocket (part# 46810070) follows. Replace them as a set rather than one at a time.
My machine will not drive at all – where do I start?
Check the drive microswitch (part# 63409012) and its support bracket (part# 21707050) before suspecting the traction motor. A bent bracket or a tired switch stops the controller ever being told to drive.
Does the drive wheel assembly differ between the TS120-S59-UC, UG and UE?
No. The three BDSO 20/21 models differ only by battery type and share this entire drive wheel assembly.
Why are some rows on this diagram marked call us?
Those are parts the factory does not sell to us separately, including the drive wheel itself (part# 46523120). The row stays on the table so the numbering matches the drawing, and we can usually still source the item – call 763-535-0770 with the item number.
Back to all Tornado BDSO 20/21 parts diagrams, or browse the Tornado BDSO 20/21 parts category. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428 — servicing commercial floor equipment since 1956. Call 763-535-0770.












































